Jump to content
SAU Community

R33 Xhaust, Airbox & Snorkle 2x Stock Wheels With Rubber


Recommended Posts

Howdy - keep reminding myself to get rid of this stuff so:

* R33 stock cat back - $20 (pickup from Gold Coast only as i can't transport it)

* R33 stock dump + front pipe $20 (can pick up in Brisbane or Gold Coast as I can fit it in the boot!)

* R33 Airbox and snorkel $60 (can pick up in Brisbane or Gold Coast as I can fit it in the boot!)

* R33 stock wheels with what is probably non-legal rubber (x2 only) $100 (can pick up in Brisbane or Gold Coast as I can fit it in the boot!)

* R33 stock intercooler $30 (can pick up in Brisbane or Gold Coast as I can fit it in the boot!)

* R33 S 1.5 fog lights $50 for both (can pick up in Brisbane or Gold Coast as I can fit it in the boot!)

think that's it... i'm in brisbane through the week, but all this stuff is on the coast - can get it on a weekend and bring to brisbane or arrange to have it picked up from the coast.

Umm contact on this forum or 0450 312 360

Cheers

Dane

post-37671-1202810592_thumb.jpg

post-37671-1202810605_thumb.jpg

post-37671-1202810615_thumb.jpg

post-37671-1202810623_thumb.jpg

post-37671-1202810641_thumb.jpg

post-37671-1202810651_thumb.jpg

Edited by made_guy

yeah pretty sure i put one in not long before i took it - just a cheap paper one from supercheap whatever brand they are.

where are you?

hey mate, everything is on the gold coast at the moment til the weekend unfortunately as i have no way of getting it up to brisbane during the week, and i had left the coast at 2:00pm yesterday so just missed out on seeing your post.

i can wait till next week if you want i am only in brisbane during the week also i live about an hour out of bris so if you want to bring it to bris next week pm me your contact details and we will arrange it.

cheers



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...