Jump to content
SAU Community

Recommended Posts

drunken dragonforce expert battles rule!

hi5 brother

dont own a console, but played it at a mates 21st on saturday

think i got 27% of notes hit with a streak of 5 notes....

when ur reflexes are so slow you just gotta pic one colour and hit the strum bar as fast as you bollocksing can

wicked fun :(:) :)

Activision's statement reads "We recently became aware that some consumers have not been able to enjoy the full audio output in the Wii version of Guitar Hero III: Legends of Rock. We are currently working with Nintendo and are planning to issue an improved audio experience in future versions of the game. We expect to have re-mastered discs available by early 2008 and we will be offering consumers replacement discs at no cost once they become available. Should you have any further inquiries, please contact Activision customer support at www.activision.com/ Customers based in Australia wanting to pre-register for a free replacement disc can call (02) 9869 0955 (or 09 477 2582 for New Zealand) and we will notify you once the replacement discs are available. We thank all of our customers for their support and patience."

when my bro in law suggested getting GH3 for my 21st i was like "nah that'll be crap..i don't wanna play that" but came home one day and he had it...and i was like "yeah alright give me a go.."

I'm now hooked..i love it..

i was thinking the other night tho..a good song to have on it would be Thunderstruck by AC/DC

when my bro in law suggested getting GH3 for my 21st i was like "nah that'll be crap..i don't wanna play that" but came home one day and he had it...and i was like "yeah alright give me a go.."

I'm now hooked..i love it..

i was thinking the other night tho..a good song to have on it would be Thunderstruck by AC/DC

http://au.youtube.com/watch?v=1P_4PmfwuW8 - Thunderstruck, custom Guitar hero

  • 3 months later...

I only like playing against human players/mates on the PS3 but I suck anyways :P

But ive noticed that after we have some puff we all get better somehow, anyone else?

anyone know if there is major differences across platforms??

not sure if I should get it for wii, ps3 or 360

Buy it off me on X360, ill throw in delivery for free!!! :P

[EDIT] Oops just saw u got it on PS3, any other takers?

Dare I say...you've never REALLY played guitar hero...

until you've played with a naked stripper at a buck's party! :P

GuitarHeroEdited.jpg

(I know, I know...sorry but I had to edit it...I might STILL get in trouble for posting that, but...oh well...)

  • 3 weeks later...

Stripper???

No, no, no...

My friends...there were THREE of them...

and they weren't stripping...

They were naked the ENTIRE 5 hours we had them there for, walking, talking, serving us drinks and bbq...we only wanted the coldest beer from the bottom of the barrels :D

oh...and of course, playing guitar hero. apparently jumping up and down while playing scores extra points...or at least thats what we told them :down:

private lap dances cost extra...but why bother? Haha...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...