Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You'll have to weld some flanges on to fit it.

And yeah it doesn't get that quiet by making power! Puts out a crazy rasp at high revs. Still a well designed muffler though so not TOO restrictive.

I really paranoid about driving with it closed. So I just take it nice and easy.

yea, so after say a year. the flange will have carbon build up.

so if the butterfly valve gains a bit of carbon, even with it open, it will still restrict the exhaust.

so a 3'' will be basicaly 2.50. this is my problem. have been thinking about this problem for a while.

a clear exhaust =loud

an impaired exhaust= quiet but restrictive :S

forgive my ignorance, is this item flanged?

incase i wanted to go back to my zetti muffler??

edit: is there any backpressure problems when diverting the gas flow thru a 1'' hole!!!!!!!!!

Yep, flanged.

Not sure what you mean with 1" hole - or do you mean when the valve is closed? If the latter then you simply go easy when it's closed, if you want to put the foot down - then open it to full.

OK...

I have my Varex fitted. Previously I had an Xforce cannon muffler (and resonator that was freaking me out due to it's close proximity to the ground), now fitted with a hot dog style resonator.

My first impressions are that overall, the Varex is quieter than my old cannon, even when wide open... but I've lost that horrible drone which was driving me nuts (yay).

I also went for the oval version with twin tips - this normally retails around $500 but I got it for $400 (long story :)

Performance affected?

Well, hard to tell after just the trip home from the exhaust shop... although I did do a semi-serious acceleration test from a standing start through to about 140km/h on a (mostly) lonely bit of highway - and it felt mostly the same as before. Might be a slight loss... hard to tell for sure until I get out there and try it again when it's all quiet. I suspect the turbo is spooling up a little higher in the rev range but again I'm not 100% sure yet.

One thing is for sure - it looks practically the same as the factory muffler and shouldnt get the cops all excited like the cannon did.

When set to quiet - it is damned quiet all right! In fact, all I can really hear is induction roar.

We spliced the wiring into the rear wiper power feed, so no need to run it to the bloody ciggie lighter...

Anyway, here is a quickie video I did which might help give you all a better idea of what it looks and sounds like. the first bit shows the old Xforce cannon muffler: http://au.youtube.com/watch?v=autQyxmR8N4

I might do a better video later on, as this video doesnt show the valve operating, or really show off the new muffler from all angles.

Edit - pic added:

post-46181-1204332899_thumb.jpg

Edited by Wayne_J
i woudlnt mind one of these if they came in 4" inlet

XForce have been saying the 3.5" versions are "coming"... although they've been "coming" for ages now.

I'll probably buy one when they eventually release them, and put my current on onto the Suby.

4" is kind of HUGE, isn't it?

wow a big difference... you can really hear the low end deep "bass" per say disappering when its closed up!

If i didnt have my HKS Silent Hipower i would get this one for sure.. =)

I was originally keen on the APEXi PS Revolution muffler... until I found out the retail price: $1700!

XForce have been saying the 3.5" versions are "coming"... although they've been "coming" for ages now.

I'll probably buy one when they eventually release them, and put my current on onto the Suby.

4" is kind of HUGE, isn't it?

not wen ur aiming for 350rwkw+ :domokun:

  • 3 months later...

Definately getting one of the twin tip ones. my ex has one of the cannon ones on her 33. sounds as quiet if not quieter than stock exhaust when the valve is closed and nice clean louder note when open and you dont get that annoying drone on the highway either.

Unreal thread guys, was looking for some more real world info on these things and bang there it is :) Think i might wait for the 3.5" version as well.

Great vids as well thanks guys

Cheers

I wouldnt hold my breath for the 3.5" version.

Theyve been saying theyre 'gunna' produce the 3.5" version for a long, long, long time now... I've no idea why this is so, you'd think it'd be a simple thing to do given all their other products and facilities.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...