Jump to content
SAU Community

Recommended Posts

Hey guys. From yesterday, after i used the aircon after bout 2 weeks, Everytime start the car, i get this weird banging noise from behind the 2 vents in the middle of the dash. It goes for bout 10 secs then stops. It hapen now, everytime the key hits accesories. Wat could it be?

Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/
Share on other sites

<br />covered b4..<br />its some worn out gear<br />
<br /><br /><br /><br /><br />Ive got a quick fix for that problem<br />To get rid of that annoying tapping sound everytime you turn the ignition on.<br />Take out the contol unit for the fan/aircon located above your stereo.There will be two plugs in the back of the unit.Now if your sitting in the drivers seat of your car looking at the unit .... the right plug is the plug you want.On this plug there will be about 17 wires,the red wire(maybe an orange stripe on it as well ...cant remember) furthest to the right is the one that sends power to the servo with the stripped gear.<br />Cut this wire and you will no longer have that annoying tapping sound.<br />If you want to pull the whole dash apart and replace the stripped gear then you have alot more time on your hands than me<br />this guide is for a r33 gtst<br />hope this helps Edited by r33gts4turbo
Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/#findComment-3668711
Share on other sites

  • 3 months later...
<br /><br /><br /><br /><br />Ive got a quick fix for that problem<br />To get rid of that annoying tapping sound everytime you turn the ignition on.<br />Take out the contol unit for the fan/aircon located above your stereo.There will be two plugs in the back of the unit.Now if your sitting in the drivers seat of your car looking at the unit .... the right plug is the plug you want.On this plug there will be about 17 wires,the red wire(maybe an orange stripe on it as well ...cant remember) furthest to the right is the one that sends power to the servo with the stripped gear.<br />Cut this wire and you will no longer have that annoying tapping sound.<br />If you want to pull the whole dash apart and replace the stripped gear then you have alot more time on your hands than me<br />this guide is for a r33 gtst<br />hope this helps

will the aircon still work and how do i know if that is the right wire please help this noise is driving me nuts

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/207203-wat-could-it-be/#findComment-3963448
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...