Jump to content
SAU Community

Recommended Posts

mine also seems to start slow but at the moment, has gone flat!? i have an apexi full auto timer which has my battery reading at 10.4 which is way low!

I have put another alternator on the car i was thinking this may be the problem?

SHould i have my battery charged/buy a new one?

What else could it be?

Link to comment
https://www.sau.com.au/forums/topic/207255-slow-starter/#findComment-3667141
Share on other sites

alright im not sure if it is a problem because it does start every time, but it always take about 2-4 seconds before it fires up. Is this normal and how can i fix it?

Does it sound like the starter is struggling to turn it over? If so I would check the battery voltage and if it seems low take it to battery world or something and have it tested.

mine also seems to start slow but at the moment, has gone flat!? i have an apexi full auto timer which has my battery reading at 10.4 which is way low!

I have put another alternator on the car i was thinking this may be the problem?

SHould i have my battery charged/buy a new one?

What else could it be?

I had a problem with my battery going flat and found out the stereo was causing it... drawing current all the time. You can test to see if your battery is being drained while the car's off by disconnecting the negative battery terminal, and putting your multimeter in series to check how much current is coming out.

Don't switch the ignition to any sort of "on" while it's connected like this, or you'll likely kill your multimeter and melt some wires in the process.

Make sure all doors are shut (boot included - you'll need long leads to get to your multimeter through the gap in the boot), and then wait for the light around the ignition key hole to turn off after closing all doors. If the current reads in the hundreds of milliamps then it's worth pursuing this further.

I don't know much about alternators, though I've read that a healthy alternator should put out 14.4V or more (prolly need to rev engine and look at the reading).

Link to comment
https://www.sau.com.au/forums/topic/207255-slow-starter/#findComment-3667484
Share on other sites

Does it sound like the starter is struggling to turn it over? If so I would check the battery voltage and if it seems low take it to battery world or something and have it tested.

I had a problem with my battery going flat and found out the stereo was causing it... drawing current all the time. You can test to see if your battery is being drained while the car's off by disconnecting the negative battery terminal, and putting your multimeter in series to check how much current is coming out.

Don't switch the ignition to any sort of "on" while it's connected like this, or you'll likely kill your multimeter and melt some wires in the process.

Make sure all doors are shut (boot included - you'll need long leads to get to your multimeter through the gap in the boot), and then wait for the light around the ignition key hole to turn off after closing all doors. If the current reads in the hundreds of milliamps then it's worth pursuing this further.

I don't know much about alternators, though I've read that a healthy alternator should put out 14.4V or more (prolly need to rev engine and look at the reading).

Yeah cheers man, i have an old atlernator hre (it squeels a bit, think bearings are gone) however it did work..so i'll bolt that on today and if that doesn't work i'll try charge the battery again. (Who can do that for me?) if that is no good it either is drained from a source or it is time for a new battery.

Link to comment
https://www.sau.com.au/forums/topic/207255-slow-starter/#findComment-3668286
Share on other sites

dw guys, i just finised bolting on the original squeely alternator, kick started in 2nd gear and she is now charged back to 13.9voltz which is great! and the old alternator is not squeeling!!! well for now anyhow..

Link to comment
https://www.sau.com.au/forums/topic/207255-slow-starter/#findComment-3668519
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Spotted in Adelaide last week.... mine! New to me two weeks ago.. love it!
    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
×
×
  • Create New...