Another Whiteline Swaybar Question

[SevenAngryPenguins]

Hi suspension guru's,

Ok a few weeks ago I got my self some whiteline swaybars the front (BNF24Z) was 24mm, The back one (BNR11Z) is 20mm with 2 adjustments, well i noticed that the group buy bar is 22mm with 3 adjustments, how much stiffer is the 22mm bar and my question is would it be worth while upgrading to the 22mm bar?? I already have the back bar on the hardest setting and the front on the second hardest.

heres a video of the car in action if your bored

[Sydneykid]

I found the 20 mm rear bar to be too small, hence why the Group Buy has the 22mm. The extra adjustment hole (softer) is to bring the 22mm bar down similar to the highest setting on the 20 mm bar.

The symptom of too small a rear bar is mid corner understeer that persist even with the bar on the highest setting. The only reason I would use a 20 mm rear bar is if the car has lots of power (280 rwkw plus) and hence tends to power oversteer on corner exit. Even then I would probably upgrade to the 26 or 27 mm front bar rather than downgrade to the 20 mm rear.

What springs and shocks do you have in it, as they are relevant as to how much anti roll you can use?

Cheers

Gary

[ZENNON]

What springs and shocks do you have in it

Bilstein shocks and Whiteline springs i believe..

[SevenAngryPenguins]

Bilstein shocks and Whiteline springs i believe..

thanks gary,

yes has the GB springs/shocks, looks like i'll be getting the bigger bar then. Can you tell me how much stiffer the bar gets with each hole of adjustment (for the 22mm)