Jump to content
SAU Community

Recommended Posts

Hi all,

My power steering like has got a severe leak in it!! It is only one part of the line, one of the flexi parts of it, just wondering if I should just get a cheap second hand one from a wreck or should I get the flexi part done in braided? Anyone know where I could get a second hand one from?

Thanks.

Joe.

PS. Here is a pic of the line, the first one shows the line, the second one shows where the line joins to on the power steering pump. It is the line that goes from the pump all the way across the X member over to the rack.

post-33902-1206432352_thumb.jpg

post-33902-1206432458_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/211938-power-steering-line-leak/
Share on other sites

I had one of them leak in a 32 at work. You can get it quite cheapely repaired from places like Enzed etc Braided line would be a waste of time and money in my opinion. The rest of the system will still be original. Go with the normal repair or second hand.

Yeah, I was just talking to a mate who is a mechanic as well, he said they are heap to just get repaired, I thought they would have to replace it with braided line, but he said they just replace it with the standard kinda hose stuff! Sweet corn!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...