Jump to content
SAU Community

Hot Start Cranking Issues

WogsRus

By WogsRus,
in General Maintenance

 Share

Recommended Posts

WogsRus Veteran

WogsRus

Posted
Posted

Car's been goign great, fixed my cold start ect.

HOWEVER no for some reason, when the car gets warm, it takes two cracnks, or the acc pedal to crank it over and start.

I have not had the computer on teh car yet, i will check AFM and water temp sensor today, and reste idle and timming, BUT does anyone have an idea as to what else could be teh couse.

The fuel pump should be ok, about 1.3 years old, walbrow pump. Fuel filter replaced 15k ago.

I'll aslo run some injector cleaner etc to see if that help.

Any ideas?

Ta

Link to comment
https://www.sau.com.au/forums/topic/212347-hot-start-cranking-issues/
Share on other sites
WogsRus Veteran

WogsRus

Posted
  • Author
Posted

OK So

Cleaned AFM, stll same.

Checked fuel pressure, same, up or down on pressure makes no differance.

Checked and reset timming via cosult.

Checked Error codes, TPS ect, all fine.

Changed water temp sensor, there is 2 deg C differance between the two, still the same.

Pulle dout two plugs, look brand new.

Battery voltae is 14.2 volts, but i am pluging the battery in tonight just in case.

No Idea what else to check, it happend all of a sudden 3 days ago. The car was running a bit low on fuel, but doing the individiual injector test through consults came up all good.

Fuel pressure is good and increasing or decreasing fuel pressure makes no differance.

Also more or less fuel on startup makes no differance

DAM IT AGAIN i wish i had a PFC.

Ok any ideas?

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
    • BOLGE
      R34 Plug Identification

      By BOLGE · Posted

      legend thanks mate !
    • fatz
      Neil's R33 Gts-t Build

      By fatz · Posted

      Skidz
×
×
  • Create New...