Jump to content
SAU Community

Recommended Posts

I have a number of standard ecu's for anyone on here that is having stock computer problems that require a replacement. They came off cars in perfect condition that were upgraded to power FC/Haltech etc. It's always good to have a stock ecu spare for those who have "plug in" style engine management. These are what you'll need to clear defects, and are also good for diagnosing electrical gremlins.

picture005ez6.th.jpg

1 x GTI-R Pulsar

1 x CA18DET manual

1 x SR20DET silvia manual

2 x 180sx SR20DET manual

1 x S14 VCT manual

1 x Aus version s15 sr20det manual

2 x Jap Spec R s15 sr20det manual

1 x RB20DET R32 GTS-T manual

1 x RB25DET R33 GTS-T Series 1 manual

1 x RB25DET R33 GTS-T Series 1 auto

5 x RB25DET R33 GTS-T Series 2 Manual

$100 Each Pickup - $125 delivered Australia wide.

Meetup is at Brisbane on the Southside at Sunnybank - PM me to arrange pickup.

or; Delivery by Australia Post registered mail with proof of receipt will be supplied.

Check my signature, and contact those people who I've successfully traded with in the past.

I am happy to post more pics/supply serial numbers if you require just ask.

Check your PM's when you ask me questions.

No items will be put on hold! Don't post if you are not interested - It's that simple - Cheers.

Edited by silman
Link to comment
https://www.sau.com.au/forums/topic/212860-stock-nissan-ecu-computers-for-sale/
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 1 month later...
  • 5 months later...

Update - Sold a lot of ecu's thanks, here is what is left as of today.

1 x S13 CA18DET manual (#98 RED LABEL on the sticker)

1 x S14 SR20DET Black Top Manual (XG on the sticker)

1 x S15 sr20det black top manual australian version (LJ on the sticker)

2 x S15 sr20det black top manual JAP SPEC (QT and QU on the sticker)

2 x RB25DET R33 GTS-T Series 2 Manual (CC on the sticker)

$100 pickup, or $125 delivered.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...