Jump to content
SAU Community

Recommended Posts

Hey im starting to looks for rims for my black r33 s2 NA (4stud)

and went into Dande TTF the tyre factory

Found nice set of rims.

they are Lenso RS-5 black in 18's.

does anyone have these rims or have any pictures of these rims fitted on a car prefferably a skyline :thumbsup: so i get a rough idea of what it will look like.

thanks

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/
Share on other sites

If the link posted are the same wheels as you're going for/getting, they're gonna look shit (fitment wise). They're only 7" wide with an offset of +42 (higher than standard).

Fail from me. :D

Edit: Sorry for my comment, you didn't ask for opinions. :D:)

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3773880
Share on other sites

Guys, he doesnt say anything about sizes, just what the style he is looking for. I found that photo and put it up there, so they may not be the sizes he is looking for. Look at the wheel style rather than the wheel size and go from there.

From my experience, those brand of wheels won't offer much wider wheels or lower offsets anyway.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774135
Share on other sites

Well, I think thats the information he is after. He said he's getting 18's though. Do you know what sizes they do come in? May as well give the guy a hand while we're here!! Btw, dont ask me. I'm shit with the whole offset thing!

They only come in 17 x 7.0 and 18 x 7.5 from what I can see and I highly doubt they come in any other offset.

Edit: They come in 19 x 8.0 as well. No offset was mentioned for any width.

Edited by adam-__-
Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3774166
Share on other sites

  • 3 weeks later...

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

post-38129-1208782347_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3812850
Share on other sites

thanks for all the info guys and yea opinions welcomed good or bad....im looking for this style in four stud ...i dont know anything about offset so i was just hoping these would sit nicely??

i am 100% on getting 18inch just hard to come by in black four stud.

How they'll look when fitted will depend A LOT on what the offsets are.

You're after 18" so they'll be 7.5" wide (not wide at all).

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3813508
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :P

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821035
Share on other sites

ok my mum rang up few shops to get quotes and she got told that putting the Lenso rs5 on my 33 n/a would be illegal due to the offset????? and if in a collision insurance wouldnt cover me.

its annoying the hell out of me trying to find decent 4four stud black rims...i found some finally and they wont fit properly due to offset :D

anyway we got reccomended to go to Motorsport wheels and tyres or something in dandenong so might have a look there.

That offset/track or wheel modification rule is farkin stupid.

Your wheels can't be 25mm wider/thinner than the widest wheel specified by the manufacturer for that vehicle, you can't increase/decrease the car's total track by 25mm, etc.

If you want to keep your car 100% legal, don't modify your car at all. Any modification will be illegal unless you get some engineers certificate.

Link to comment
https://www.sau.com.au/forums/topic/213666-lenso-rs5/#findComment-3821942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...