Jump to content
SAU Community

Recommended Posts

Buds,

Need some help. I have a R33 GTS 1997 series 2 runing stock boost. Only mod is 3 inch piping after the cat. Two questions

1) Boost seems to build up and I only feel the rush at 4K rpm. Is this normal?

2) The previous owner cut the sensor wire at the catlytic convertor. What is the sensor for and will it effect performance.

Thanks alot !!!

Link to comment
https://www.sau.com.au/forums/topic/214561-r33-gts-problems/
Share on other sites

i'd like to know the answer to "The previous owner cut the sensor wire at the catlytic convertor. What is the sensor for and will it effect performance." as well.

Yeaha as paul said stock boost is staggered it runs in dual stage 5 psi up to 4500rpm(ish) then 7psi from then onwards!

Gl man. welcome to the world of skylines btw!

cutting the cat sensor wont change a thing, it just means the cat overtemp sensor light on the cluster wont fire when the cat is hot

the previous owner might have cut for fun or because it was on all the time. if it was on all the time, then it could indicate the cat is blocked or toast

might be worth pulling the cat off to check it out

thanks for that paul i will be doing this myself when i find some time (really wanna finish my intake manifold though!!) :)

Buds

Thanks for the input. I was kinda dissapointed as this car feels so laggy and the little kick comes in only at 4K rpm. Gonna get a manual boost controller and take it up to 0.8 bar with an E-manage to take care of the fueling and ignition. Will update the results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...