Jump to content
SAU Community

Recommended Posts

Hi all,

I have a problem where my r33 won't start when it's cold or hasn't run for a few hours.

I turn the key and get nothing, the dash lights fade but I can't even hear the starter trying to crank over. The strange thing is that if I sit there and turn the key lots it always seems to eventually start. It took 35-40 turns thismorning (after not driving it yesterday) but when it eventually decided to go it started perfectly. If it's been driven an hour or two beforehand it seems to start fine.

It all seems to indicate that the starter isn't getting enough juice but then why would it start after 30-40 turns? Surely this would have drained anything left in the battery if that was the problem?

I've taken it to be looked at twice now but the bloody thing always starts perfectly for them (after having been driven to the workshop).

If anyone has any suggestion they would be appreciated, it has been getting progressively worse since it started 2 or 3 weeks ago (again pointing to battery?).

Thanks

(I've hunted around the previous threads similar to this but couldn't find anyone in this situation)

Link to comment
https://www.sau.com.au/forums/topic/21535-strange-starting-problem/
Share on other sites

ive also had a similar problem to this, but i checked mine out an an auto elec that i know and he thought it was the alarm that was draining bit too much power from the battery when the light was always flashing. i changed my alarm and since then it starts fine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...