Jump to content
SAU Community

Recommended Posts

Hi all,first post and newbie question.Picked up a real cheap 200zr,rb20det.I am trying to get it going on the cheap and cant get any parts around here(cairns qld).A need a complete fuel rail with injecters and noticed my mates ausi skyline wagon with a rb 30 non turb has a really similar rail and injecter set up.now i know im talking 3ltr rail and injectors to a 2ltr,but as a newbie what are the chances of using it.Any one know or ever tried it .Thanks.

Link to comment
https://www.sau.com.au/forums/topic/216428-200zr/
Share on other sites

Hi all,first post and newbie question.Picked up a real cheap 200zr,rb20det.I am trying to get it going on the cheap and cant get any parts around here(cairns qld).A need a complete fuel rail with injecters and noticed my mates ausi skyline wagon with a rb 30 non turb has a really similar rail and injecter set up.now i know im talking 3ltr rail and injectors to a 2ltr,but as a newbie what are the chances of using it.Any one know or ever tried it .Thanks.

Hey

I have a 200ZR and so do a few of us at Z31 forum

You should really get on there for help and check out the R32 Engine guide (same engine basically) here on Skylines Australia

Hope that helps

Link to comment
https://www.sau.com.au/forums/topic/216428-200zr/#findComment-3822731
Share on other sites

having owned and worked on both cars, I can definitely say they they look the same, however without physically trying the rail not 100 percent, but I dare say it will fit....

injectors are different to a normal rb30, but ironically are identical to vl turbo ones. vl turbo fuel rail is the same as a normal rb30 I believe.

and no a silvertop R32 is different in lots of ways, ecu, loom and sensors all different, intake manifold, otherwise mechanically very similar.

Link to comment
https://www.sau.com.au/forums/topic/216428-200zr/#findComment-3827107
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...