Jump to content
SAU Community

Recommended Posts

I've got the reversing beep too...like the trucks have. Also on another note...does anyones tiptronic beep when shifting gears? I could have sworn mine beeped during gear changes when I first got the car but doesn't do it anymore...or maybe I'm just hallucinating??

I'm quite sure the beeping speaker is in the steering column. Same beeper used for when you leave your headlights on and when you leave the key in the ignition and open the door.

I'm going to try to open it up tonight and cut the wire. Hope I don't set off the air-bags or anything.

I'm quite sure the beeping speaker is in the steering column. Same beeper used for when you leave your headlights on and when you leave the key in the ignition and open the door.

I'm going to try to open it up tonight and cut the wire. Hope I don't set off the air-bags or anything.

looks like i must be the only one with only 1 beep when the gear (6MT) is put into reverse. But I had the optional Momo steering wheel, thats prob why...

I'm keen as to get rid of my reversing beeps as well, I'm confident that it is controlled by the BCM (Body Control Module).

Chris, please let me know if there is a way of removing it without effecting the headlight & other neccessary warnings, once you get hold of this new tool :thumbsup:

  • 2 years later...
I'm keen as to get rid of my reversing beeps as well, I'm confident that it is controlled by the BCM (Body Control Module).

Chris, please let me know if there is a way of removing it without effecting the headlight & other neccessary warnings, once you get hold of this new tool :)

On a previous car I got rid of the beeping by simply finding the damn beeper and filling everything with silicon and letting it set.

Basically muffled the noise right down as in the absence of air there was no noise transmission and avoided any risk of screwing up some obscure electronic system that may or may not be present

My 2002 gt8 has the beep too, just curious as a I had a instance on 2 seperate occasions recently where I had the battery and park brake lights come on and a Japanesse girl spoke too me, by the time I got to Nissan to get codes from the computer it had cleared.

Would cutting the wire to this speaker remove the instance where the girl will speak to you?

Does anyone else find it amazing that no matter how old a topic is, someone manages to dig it up from over 3 years ago and everyone else continues to reply as if it was yesterday's news?

*cuts some slack* I remember the first time I discovered a message board I posted on pretty much every topic I thought was relevant without considering the date of the last reply... and for what it's worth, it was a daihatsu enthusiasts forum.

To keep this reply on topic to the original post.......

Reverse beeping is a feature commonly found on automatic equipped vehicles.

Filling the speaking with silicon will silence any other warning signals (ie lights left on, door open)

Cutting the reverse signal wire will stop your reverse lights from working.

My experience with consult is limited to 90's models.

figuring consult will turn it off.
Can you really turn features on and off using consult?? Edited by daisu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...