Jump to content
SAU Community

Recommended Posts

Hey guys, over the last few weeks i have been talking to a few people about whats happening to my 34, after speaking to a few of these people, im starting to think my 34 nismo is not an authentic one... is there any way i can tell, like check over the internet or something??

Edited by A31StRuCK
Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/
Share on other sites

if u bought from powerplay than its nismo

* GT-R - 2.6 L RB26DETT twin-turbo I6, 332 PS (244 kW, 392 N m) (advertised as 280)

* GT-R V-Spec - Additional aero parts, brake ventilation ducts, diffuser.

* GT-R V-Spec II - As above + carbon fibre bonnet with NACA duct.

* GT-R N1 - Blueprinted N1 motor, no A/C, no stereo, no rear wiper, basic interior trim. (only 45 made)

* GT-R M-Spec - Leather interior, softer suspension with "Ripple Control" dampers, heated seats.

* GT-R V-Spec II Nür - As above V-Spec II + N1 motor, 300 km/h speedo. (only 750 made)

* GT-R M-Spec Nür - As above M-Spec + N1 motor, 300 km/h speedo. (only 250 made)

* GT-R NISMO R-tune

* GT-R NISMO Z-tune - 2.8 L (bored and stroked) RB26DETT Z2 twin-turbo I6, 500 PS (368 kW, 540 N m) Z1 and Z2 (Only 20 made)

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3836910
Share on other sites

It's not a nismo car, and technically speaking it's not really a nismo kit (although other's would argue otherwise)... it's actually an Aero kitted factory GTT. Sorry to say, based on my knowledge of GTT's you don't have a "nismo" car as per se.

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3836981
Share on other sites

Might be on the auction sheet, but you probably won't have that. And I take it you don't have japanese service manuals? The thing is most imports are wound back... often more than once, too many points where it could be wound back ... e.g. in japan, at auction, in australia by the importer, in australia by the dealer. If the motor and body is in good nick be satisfied with that.. with all RB's it's all down to how well it's been serviced and looked after generally.

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837004
Share on other sites

ok also is there some way to find out if the 100 thou service has been done, obviously i recieved the car before 100,000 so there would be no stickers on the door or window... car runs smooth as but cant really push it as its due the service, but i dont wanna spend that money if its already been done ya know!

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837043
Share on other sites

If you're lucky there's a sticker that sometimes comes with a new timing belt, that gets placed under the bonnet. If you don't have one, then I suggest you change it (and the waterpump, and the plugs, and all the other things you do at the 100k service at the same time).

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837049
Share on other sites

Here is the quote I got from boostworx for a 100k service.

$170 water pump

$95 timing belt

$240 labour

$77 service / safety

$65 oil

$140 redline (tran + diff)

$55 coolant

$145 dyno

$140 platinum plugs

Whoa, man thats alot eh, i can get the parts for the 100 thou service for like $360... thats belt, bearings, water pump the whole lot!

then all i need is to get the oils and fluids then get someone to do it for me!!

anyone on here know how?

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837065
Share on other sites

Well that's the list price, and it's not really that much when you think about it - just shop around and you'll see. Especially given that boostworx found a AFM problem on the dyno (picked up a lost 15rwkw), and a front suspension bracket issue... good to see some mechanics still know their trade well.

But yeah if you want to save some, do the fluids yourself, the plugs even. Not really hard dropping the oil... undo the screw on the bottom of the sump, dump the oil into a pan, change the oil filter, put screw back on, fill up with motul oil, and bob's your aunty.. umm uncle even.

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837075
Share on other sites

there are certificates issued for parts fitted by nismo after sale but doubt you have them. Is there even such a thing as a nismo gtt r34? it was probably just a gtt some stuck a few nismo things on and said it was a nismo gtt? Did you pay a premium for the car because they claimed is was a "nismo"?

Link to comment
https://www.sau.com.au/forums/topic/217310-is-it-authentic/#findComment-3837167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
×
×
  • Create New...