Jump to content
SAU Community

R33 Engine Cutting Out

OldSilver
 Share

Recommended Posts

OldSilver Newbie

OldSilver

Posted
Posted

R33 series2 80K's stock airfilter, cat back jap exhust, boost solenoid by-passed (boost limited by pipe restrictor to 7psi). Stock air filter, no apparent air leaks.

Had car a couple of weeks, idled at about 550rpm, runs dead smooth idles smooth, accelerates well, no misfiring, running on shell V-power 98RON - but randomly stops at idle. Increased idle by turning screw on AAC valve 1/2 turn, now idles at around 700rpm - bugger! still cuts out usually waiting at lights (live in Adelaide - so car spends most of it's time waiting at traffic lights!) starts again straight away though and returns to 700rpm, so don't know whats going on.

Anyone got any ideas why?

Thought I'd strip the AAC valve and clean it with carb cleaner to see if that does any good. Might be good idea to check the plugs also what do ya reckon? Has anyone else had this problem?

Link to comment
https://www.sau.com.au/forums/topic/217457-r33-engine-cutting-out/
Share on other sites
sneaky1 Mentor

sneaky1

Posted
Posted

i have an r32 with rb25 in it and mine dies to but only if i accelerate and then stop quickly for lights. it always has. ive been told its my idle sensor needs cleanin but haven been bothered to do it.

try checkin that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...