Jump to content
SAU Community

Recommended Posts

Hi I am planning to buy a R34 GTR private sale.

The plate with the VIN/Engine number in the rear left engine bay is stamped/engraved.

I read on this forum that if it is engraved then it might be stolen - factory plates have the details PRINTED, not engraved on them.

The VIN matches what Vicroads tells me, but the engine number is not the same as that stamped on the plate. The guy told me not to pay any attention to that as that was the stamp in Japan, and the engine number would be different in Australia?!?!?!

He is sure the engine hasn't been swapped.

The compliance plate is a red/mauve printed plate on the left hand side of the engine bay, about halfway down.

Just wondering what you guys think about this, is it dodgy? I was originally planning to buy it in the next few days.

Cheers. Any advice would be greatly welcome.

Hi I am planning to buy a R34 GTR private sale.

The plate with the VIN/Engine number in the rear left engine bay is stamped/engraved.

I read on this forum that if it is engraved then it might be stolen - factory plates have the details PRINTED, not engraved on them.

The VIN matches what Vicroads tells me, but the engine number is not the same as that stamped on the plate. The guy told me not to pay any attention to that as that was the stamp in Japan, and the engine number would be different in Australia?!?!?!

He is sure the engine hasn't been swapped.

The compliance plate is a red/mauve printed plate on the left hand side of the engine bay, about halfway down.

Just wondering what you guys think about this, is it dodgy? I was originally planning to buy it in the next few days.

Cheers. Any advice would be greatly welcome.

Hi Mate,

I can understand your concern. There is quite a big thread on this on here somewhere, possibly try other sites such as boostcruising.com and nissansilvia for any other possibilities if you can't find it on here...

If the engine numbers doens't match what is on the plate, start to ask questions. It is not illegal to swap or change an engine as you may already know, but what I think you are more interested in is if the GTR has been built with stolen parts. etc?

Try contacting VICroads for the registered details including engine numbers and everything on the vehicle register. If not, you can get a check (In QLD there is something called R.E.V.S) where you can supply all the details of the car, eg. chassis number, engine number, VIN. etc and they can check the history of the car, crashes, whether is has been written-off and repaired, stolen. etc. so hopefully that will be able to turn something up for you and give you better piece of mind. Hopefully something similar is available in victoria, up here it only costs 30 bucks or something, so if you are really interested in the car, but have a couple of doubts as whether everything is legal or not, this inspection/check may help to clear some things up.

Maybe call the rego office and confirm the details of the car, who it is registered under. etc.

If details don't match up to what the registration office has, you should definately steer clear of this one, there is no compensation for stolen vehicles unless you can sue the owner :cheers: for selling you stolen parts. etc.

Other than that good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...