Jump to content
SAU Community

Recommended Posts

i think those chromies would look great on a red s14! Don't listen to what ppl say...if you like them, that's what matters! but just think...do you want an auto salon type look, or more of a racing look?

i really like the Volk racing wheels, not sure how they'd look on an s14 though?? get someone to photochop a few different ones for you :)

volkdspeed_intro.jpg

volkgtp_intro.jpg

volkte37_intro.jpg

Guest neoGT-25

chrome wheels are so gay REOW!!!... cops give more attention too... and so do theives...

how about the top secret special edition VOLK TE37's (19") for like $1100 each (without tyres, shipping or import taxes)

lol, expensive but SEXIEST wheels ever! i think any wheels that are bronze/gold or white on a red car look sick! black wheels look good too! :P

Yep the forged ones. I know someone with them on his 180SX - He says they weigh fark all, less than stockers. They also look damn hot. Theyre nice rims you really should consider them. If you dont know how to contact c-red see www.c-red.com.au

They won't cost you $4k though, less than that, i'm unsure of the price without tyres - his $4k included 17" 255 FM901s as well....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...