Jump to content
SAU Community

Recommended Posts

Item: Tomei Reytek programable ECU with map sensor

Age: 1-2 yrs

Condition: Perfect

Price: $800 ono

To Fit: (What car) R32 GTR

Location: Brisbane

Contact: PM or 0422382292

Comments:

This is a fully programable ECU which uses a map sensor to eliminate afm's like the D-jetro PFC. Im basically selling it as I couldnt find anyone at the time to tune it in Brisbane. I know that Unique Autosports in NSW sell and tune them, and some DR Drift (cant remember name)in Vic and a place in perth but could be more that do now. You can buy the tuning software and iterface kit from tomei for them too.

I pulled it out of my car which had it installed in the Tomei workshop in Japan along with other things. The car was running around 310awkw (mercury motorsports dyno)with T04R turbo (17psi), tomei 260 cams, upgraded pump and still with standard injectors. Car ran 11.5@126mph with that setup and was getting 500kms per tank of fuel. I have since upgraded many things and swapped for a PFC d-jetro cos no one tunes it in Brissie otherwise I would have kept it!

Unique autosports sell them for $1900 exchange---> http://www.uniqueautosports.com/ (look in the tomei section)

for more info ----> http://www.tomei-p.co.jp/_2003web-catalogu...dex-reytec.html

OTHER THINGS FOR SALE:

One set of R32 GTR injectors with fuel rail and nismo adjustable regulator. Was running 310awkw safely which led me to believe they might be highflowed but not sure?? Might need new buckets which can be bought from an injector place for a few dollars or less. Were running fine and pulled off for bigger items.

$400 for the lot. Will not separate

One GReddy 60mm black face mechanical boost guage. In perfect condition and working fine. Was in car when bought a replaced for a Defi guage. Just needs vacuum line to work.

$100

Chrome catch can which I bought a while ago. Still new in box with all parts required.

$30

RB26 cam gear front cover and stock cam gears in good condition

$75

RB26 oil breather U pipe between cam covers in perfect condition

$20

RB26 clutch pack fan. Was in good working order and not slipping. I have grinded a little off the edge off the blades as seen in pics to clear the radiator I put in. I went to thermos as the shroud couldnt be used. The grinding hasnt done anything to performance of fan.

$30

If interested either reply, PM or call me on 0422382292. Will post interstate at buyers cost. Prices are neg.

Cheers,

Glenn

post-4200-1210563831_thumb.jpg

post-4200-1210563848_thumb.jpg

post-4200-1210563876_thumb.jpg

post-4200-1210563896_thumb.jpg

post-4200-1210563915_thumb.jpg

post-4200-1210564074_thumb.jpg

post-4200-1210564167_thumb.jpg

post-4200-1210564263_thumb.jpg

post-4200-1210564337_thumb.jpg

Edited by 06tst

price drop on Tomei Reytek ---> $700 ono. I need this gone asap!

It is a great ecu and fully tunable. If you are in Sydney and looking for a cheaper option programable ECU this is it. Unique Autosports deal with them in the western suburbs (seven hills) of sydney and can tune them.

Also Melbourne people, DR DRIFT can tune them aswell. He is also in western suburbs at Brooklyn.

price drop on Tomei Reytek ---> $700 ono. I need this gone asap!

It is a great ecu and fully tunable. If you are in Sydney and looking for a cheaper option programable ECU this is it. Unique Autosports deal with them in the western suburbs (seven hills) of sydney and can tune them.

Also Melbourne people, DR DRIFT can tune them aswell. He is also in western suburbs at Brooklyn.

i can tune thenm also, whats your best price?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...