Jump to content
SAU Community

Recommended Posts

I just bought a R33 Series 2 Skyline on the Saturday, Sunday i was taking it for a drive and while waiting at the lights it just started revving by itself. My foot was on the clutch and brake and the a/c was. Has anyone had this problem before or know if it has anything to do wit the a/c being on? Its my first Skyline so im not quite sure where to start looking.

Link to comment
https://www.sau.com.au/forums/topic/218949-revving-by-itself/
Share on other sites

If you can go to a mechanic with a console they can hook up to your ecu ( assuming you have the stock ecu)

They will check your tps signal chances are this will be out of whack and they will reset it for you and all should be sweet.

A mate of mind had something similar he just went to the local ultra tune and got it all reset for cheap.

Hope it all works out well.

I just bought a R33 Series 2 Skyline on the Saturday, Sunday i was taking it for a drive and while waiting at the lights it just started revving by itself. My foot was on the clutch and brake and the a/c was. Has anyone had this problem before or know if it has anything to do wit the a/c being on? Its my first Skyline so im not quite sure where to start looking.

How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :P ?

Heaps of fun overall though! :)

How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :) ?

Heaps of fun overall though! :)

yeah it was blipping about that. i took it for another drive got it warmed up and it didnt do, it hasnt done it since. i havent experienced the random stalling but it will be something i watch out for. i got the same car so hopefully its not a normal thing in all of them :P

id be looking at a vacume leak. if oyu cant find one then head to get the tps looked at. had cimilar issues when playing around with vacume hoses on my old 33. haded put them back on corrently... could even have a cracked one.

How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :D ?

Heaps of fun overall though! :D

it will 'blip' up when your ac is on to compensate for the load. Stalling will prob. be an air leak or an atmo BOV mod. Mines great on the juice, even with my foot flat to the floor :(

i heard from somewhere that this happens when the cams aren't aligned properly?

i have a similar problem on my r33. revs would drop then go back to 1000 and drop again.

Next time you go to "somewhere" plug up your earholes so you don't hear stupid shit and repeat it and make yourself look uber stupid on your first post.

and welcome.

could be something to do with your a\c settings aswell.. eg thermostat in the evaperator as that controls when to bring on a\c compressor or any pressure switch realy in the a\c that will also account for rvs going up and down as its cycling the gas through system will only do that if its to cold or running out of gas

How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :D ?

Heaps of fun overall though! :(

I heard it could be your atmo BOV if you have one :D

  • 3 months later...
How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :P ?

Heaps of fun overall though! :ninja:

hey i got a 95 gtst too the random stall is from the bov not beening plumed back... if this is right for u then theres not much u can do with a stock ecu . try reset the ecu by taking the - off the battey mit work

How much was it revving? Are you talking about blipping up like 100-500 rpm while idling? I bought a S2 R33GTST last week and it'll randomly blip up like that while I'm idling... sometimes it will, sometimes it wont. Also, something odd is that when I go from 4th -> neutral -> 2nd with low revs it'll randomly stall, like when making a slow turn or going into a roundabout... is that normal behaviour? Do these cars really like that much juice for even slow speeds :wub: ?

Heaps of fun overall though! :P

i had the same problem awhile ago. turned out to be the IAC (idle air control). take it off the car and give it a good clean with carby cleaner should fix it.

i had the stalling prob,,,,, really it could be over 20 different reasons that i have come across so far from other peoples experience but clean the throttle body, IAC, AFM (air fuel meter), changed spark plugs to ngk platniums and make sure you try to use 95 octane or higher, i find my car splatters abit on 95 so for an extra 4cents/liter i put 98 octane only..... the bov can make it stall but but 9 times out of 10 it has nothing to do with the bov at all...... its way more likely to be the things i said and alot cheaper to do than changing a bov..... so do the easier cheaper things first and if it doesnt work then start the more expensive solutions..... also make sure the idle isnt too low, nissan recomends on a standard r33 off memory 600-700ish rpm.... it says it under the bonnet in one of those stickers if your car still has it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...