Jump to content
SAU Community

Recommended Posts

hey, appearance isn't everything

eg, you could be a gorgeous size 6-8, but if you got a personality of a fart in a glass jar...i dont wanna know ya!

im starting to see some maturity kicking in hahaha

but if ur under 20 appearance is everything hahaha

if ur not hot u look like snot hahaha,

WOOHOO FINISHED WORK FOR THE DAY

i love being young and getting away with things :P:):):banana::banana::banana::banana::banana::banana::banana:

  • Replies 473
  • Created
  • Last Reply

Top Posters In This Topic

hey, appearance isn't everything

eg, you could be a gorgeous size 6-8, but if you got a personality of a fart in a glass jar...i dont wanna know ya!

Like Bridgette from BB08 :) She's thick as! Spoilt whinging little cow! And probably a tart to boot! She irritates me. :)

My current GF isn't a glamour model, but she's got the best personality. When you get to my age, you don't care much for the exterior and the bling and shine, and focus more on "whats under the hood". :P

don't listen to him kids he's been reading........

post-31501-1211872790.jpg

:P looks are everything, till that hot rude woman makes you tear your hair out with her stupid naggging and leaves single and bald for the rest of your life.

i need to go see my thearopist now

Edited by Inline 6
kahli, im in the market for a chick into cars...how bout it... i just broke off a 3 year relationship. lol jk's

:P Some guys just have sad lifes.. Im very happy with my lover, so no thanks. lol.

im starting to see some maturity kicking in hahaha

but if ur under 20 appearance is everything hahaha

if ur not hot u look like snot hahaha,

WOOHOO FINISHED WORK FOR THE DAY

i love being young and getting away with things :P

ive always been mature, i actually turned 23 today!! hehe

:) Some guys just have sad lifes.. Im very happy with my lover, so no thanks. lol.

hehe i was only kidding, im actually not one to try pull moves over the net...:)

yeah but why a georgeous 6 or 8 why not a normal 12

Theres nothing wrong with 12s. Under that, and they're thick as. Over that, and they complain alot about their lives. 12s are a good in-between girl. :P

Happy bday to those who have bdays today.

ruby, are you saying (if you were single of course) that youd kick bridgette out of bed? :P its always nice to find a girl who is a good mix of looks and personality. but you never know their real personalities until your knee deep in shit.

Hey peeps,

Good cruise thanks everyone for waiting for me, i felt special!! Even tho some people at my school thought the r34 was a WRX and the rx-7 was a 180sx lol but everyone was talkin about it yesterday, so cool.

Im a girl for that matter!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Gr

xox kahli xox

Sorry kahli I just had no idea why we were there coz on the sheet it had hills and all LOL. No offence intented :P

eeep!

lol

i was only playin

Im stayin 60feet away from any chick for the next 6 months...

Does that mean u have lots more time for cars?

Don't worry cars cant hurt u and they never argue or complain lol just kidding ladies we love u

ruby, are you saying (if you were single of course) that youd kick bridgette out of bed? :P its always nice to find a girl who is a good mix of looks and personality. but you never know their real personalities until your knee deep in shit.

Yep, I'd kick her out of bed. Its called having standards. Been there done that, so once upon a time I didn't have standards. I've had plenty of good lookers in my time, I even married one, but she turned into a backstabbing, cheating cow. I also worked in nightclubs for years and I've seen first hand what bimbos they really are. Women like that irritate me so much I don't care how they look. Anyway, they all look the same when they hit 30 ... so find one with brains.

Besides, I find athletic women attractive ... not the model types. :down:

Yep, I'd kick her out of bed. Its called having standards. Been there done that, so once upon a time I didn't have standards. I've had plenty of good lookers in my time, I even married one, but she turned into a backstabbing, cheating cow. I also worked in nightclubs for years and I've seen first hand what bimbos they really are. Women like that irritate me so much I don't care how they look. Anyway, they all look the same when they hit 30 ... so find one with brains.

Besides, I find athletic women attractive ... not the model types. :down:

well seeing as im 20, send bridgette this way :P yeah im not a fan of anorexic model girls, curves are sexy. like rosanna mangiarelli ;)

Well happy Birthday every1 who is getting that 1 day older LOL.

In regards to the appearance and attraction. No physical appearance isn't everything and being a size 6-8 isnt everything and neither is a gorgeous face. But yes if u find that person that in your opinion has everything no matter what every1 else has told u got for it.

To some ppl physical attraction is more important in the rest but in the end its there problem and there choice

yes i cant spell i went to Seaton for those who know what and were it is LOL

Edited by InH3aven32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...