Jump to content
SAU Community

Recommended Posts

Thats true however when you live down an area such as I used to there are lots of young peoples flying around. The cops tend to then classify all people that drive a sports/v8 as a bit of a hoon so they do have an attitued when they pull you over even if you havn't done anything wrong.

I don't live down that way anymore however when I visit my parents who do live down that way I occasionally get stares from cops sitting at traffic lights etc. There are a lot of Silvia's flying around down that way.

There is now a LS1 SS commodore that they use to catch all the hoons down there as the V6's just wern't up to it.

But yer your theory is right. I guess that counts out car cruises.

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Guest INASNT
Originally posted by browny

On the other hand tho  - a lack of brain cells can also result in illegal mods. I bet cops and auto engineers would have some pretty good stories about downright stupid and dangerous mods people have tried.

My theory is that if you don't put yourself in the position to be harrassed by the cops (ie dont act like a tosser on the roads and dont hang out with people acting like tossers) then your chances of being pulled over are minimal.  

Also if you are civil to the cop and can demostrate that the mod is safe, legal and engineered (ie you have a copy of the certificate in the car) then you are in a lot better position to go free than someone who has a bad attitude.

I havent got to try this theory out yet tho 'cos i've never been pulled over.

that theory not not acting stupid and not being pulled over is just theory since u stated u have never infact been pulled over!!

I on the other hand have been pulled over on multiply occasions. 1'c it was 4.30am and i was on the way to work which was at 5.00am. I drop past a parked cop car at about 40 behind another group of cars doing 40 in a 60 zone. Cops c me, do a quick u turn and then pull me over at the lights, breath test me 0, check license, all points there, yet i still get a canary. Similiar thing happened again this time i turned off a freeway exit at around 9.00pm and was sitting on around 60, a cop car comes flying from atleast 1km behind me, tails me for another km and then stops me 0 breath tests me and canarys and epa's me!!

My theory is that if you don't put yourself in the position to be harrassed by the cops (ie dont act like a tosser on the roads and dont hang out with people acting like tossers) then your chances of being pulled over are minimal.

this theory of your is not realist my friend, and it will change when u get pulled over for bs and booked

Don't take me wrong though a eng. certificate if you show to the cop that has pulled you over will give you a more benifit of the doubt as he will see that you are attempting to do things the right way and make your car safe.

This has to be a plus. Even in the unfortunate circumstance that you do get sent to the pits if you engineer has done his research properly and knows what he can and can't do or has to do in order for the car to be legal and safe the pits wont be a problem and just an inconvenience.

that theory not not acting stupid and not being pulled over is just theory since u stated u have never infact been pulled over!!

Well since I haven't been pulled over, maybe I am doing something right :P...or maybe the cops here are just a bit more relaxed.

When I was in Newcastle I didn't see any cops come to think of it.

I did see a hooker at a bus stop hitch-hiking every day for the 4 days I was there. I'm trying to think the main road bit that was on as the roads feel strange over there. I stayed in a Caravan park that had little houses we hired out. There was also a Tyre joint just near it. It was also close to the sea well relatively close.

  • 11 months later...

Dont bother. I lived in WA, and a cop mate of my brother told me that - with similar mods to what you quoted.

He said that unless I go lighting up the tyres in town, or doing laps around the city or Kings park - I will never get pulled over, and I didnt.

If you do have to get a defect removed, you just pay $30 at the same time and get a permit for those mods. Its that simple. Drop MetBlueGTSt a PM, he has had his done.

  • 1 month later...

I have never owned a "standard" car in my life, every one of them has had mods. If the cops pulled me over I would argue the point, nicely of course. If they insisted, I would get the car inspected, but you don't have to do it right there and then. I always had plenty of time to change over the bits that needed changing. That's why I never sell or throw out the standard parts.

An example, I go for the inspection, the inspectors says "that's a standard airfilter, why did the police officer give you a ticket?" " I have no idea, maybe it was the sticker on it that he didn't like." Hint, I always have little things on the standard parts, a little sticker, a different clamp, a blue hose, anything that I can point to as being the reason.

I always keep the receipt from the inspection station, next time I get pulled over I show the officer the receipt. "I have already had this checked and the inspector passed it, if you make me go and needlessly get it checked again I am going to sue you for harrassment and loss of a days pay while I go. It''s your decision officer". They always back down.

The only thing you have to be careful of is cameras, never ever give them permision to take a picture of your car.

Remember it's all a game, don't take it seriously or personally and never get mad. ;)

SK thats interesting you say about cameras and photos.

A mate of mine was pulled over earlier this year, and the police dude took photos of the 'suspect' items that he wrote on the ticket. He made it very clear he was going to be passing them on around the station so they could be checked.

When we returned to the station after fixing them, he just looked at the car, 5 seconds later... yeah thats all ok buddy, thanks.... hmmm.

I dont like the photo idea

I have never owned a "standard" car in my life, every one of them has had mods.  If the cops pulled me over I would argue the point, nicely of course.  If they insisted, I would get the car inspected, but you don't have to do it right there and then.  I always had plenty of time to change over the bits that needed changing.  That's why I never sell or throw out the standard parts.

An example, I go for the inspection, the inspectors says "that's a standard airfilter, why did the police officer give you a ticket?"  " I have no idea, maybe it was the sticker on it that he didn't like."  Hint, I always have little things on the standard parts, a little sticker, a different clamp, a blue hose, anything that I can point to as being the reason.  

I always keep the receipt from the inspection station, next time I get pulled over I show the officer the receipt.  "I have already had this checked and the inspector passed it, if you make me go and needlessly get it checked again I am going to sue you for harrassment and loss of a days pay while I go.  It''s your decision officer".  They always back down.

The only thing you have to be careful of is cameras, never ever give them permision to take a picture of your car.

Remember it's all a game, don't take it seriously or personally and never get mad. :D

That's all well and good from getting out of fines etc point of view, but the reason I intend to get my project car fully certified is more of a liability point of view.

If your car has uncertified modifications which could deem it unroadworthy without an enigneers report, then what is the point of having insurance.

Last thing you would want is to smash into the back of a ferrari or be involved in a fatality with a car that was illegal to be on the road in the first place. Sure many people say thay will just bring it home and swap the parts back over, but if the car cannot be driven after the accident or a fatility and police are involved, I'd say that wouldnt be as easy and insurance companies will scrutinise your car if they have to pay out big dollars and look for any excuse not to pay up.

I would not recommend getting engineering reports done interstate if coming back to sa. I had my previous car, series 3 bluebird with a CA18DET dropped in it, engineered in nsw because i moved there for 12 months, then tried to come back to sa, and they would not except it. Wanted it engineered again here, because our laws are more stringent or some shit. End result, spat the dummy and bought a 32, because i refused to pay another $1200-$1500 to have it engineered, when it only cost me $300 in Wagga to get done.

I wanna know how interstate can have mods engineered to ADR standards....which dont seem to apply here in SA.

ADR = AUSTRALIAN design regulations

how can one state pass items regarding these standards, yet SA it costs an arm and a leg to do it. PLUS its not guaranteed REGENCY will pass ENGINEERED mods from another state. Yet they use the same ADR's to go by.....

HOW THE HELL DOES THAT WORK????????? :rant:

Remember it's all a game, don't take it seriously or personally and never get mad. :P

And act stupid! Don't know how many times claiming that I didn't know a mod had to be engineered save me from getting a canary!!

I've had my R34 fully engineered here in Coffs Harbour for $500, with a discount being given on future mods if done within 3 months between engineering. i.e $120 to engineer a pod filter, etc.

Can be an expensive exercise getting your car engineered, but not as expensive as not!!

My two cents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...