Jump to content
SAU Community

R33 S2 Airbag Wheel Needed

Iron Chef

By Iron Chef,
in Classifieds

 Share

Recommended Posts

Iron Chef Grand Master

Iron Chef

Posted
Posted

Hi guys,

Got an R33 S2 GT-R being complied in Brisbane that had a factory steering wheel go missing on the way over on the boat - does anyone have one lying around that I can buy or borrow? I presume its the same wheel as N15 Pulsar, S14 etc etc??

If you do, please give me a buzz asap - 0402 904 069.

Cheers

Kristian

Link to comment
https://www.sau.com.au/forums/topic/221430-r33-s2-airbag-wheel-needed/
Share on other sites
GTRgeoff Grand Master

GTRgeoff

Posted
Posted

If you feel up to a drive out to Ipswich I have one for a series one sitting here ready to fit. It should pass inspection without needing to be completely hooked up. I'm a bit crippled atm so won't be leaving the house for a few days.

It is missing the screws to attach the airbag but finding some should be easy at a hardware. call 0408124767 if you still need it.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Oh, also, forgot to add these photos I believe.
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...