Jump to content
SAU Community

Recommended Posts

Hi all,

im looking at building a Gaming PC using the following parts. What do you all think? good or bad? suggestions would be welcome!

AMD Athlon 64 X2 6000+, dual core, socket AM2, 3GHz

2GB DDR2-800 PC6400 SDRAM

Gigabyte GA-MA790FX-DS5 AMD 790FX ATX

GeForce 8800 GTS 512MB, (G92) PCI Express

All in all it should only cost around 730... im planing to hook this up to my LCD so i can use the keyboard and mouse instead of the homo controllers of the ps which i cant stand. Plus i will have one insanely large monitor.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/
Share on other sites

If you want to go with AMD then tweak it slightly, for $50 more you can do better (at MSY, see parts list http://www.msy.com.au/Parts/PARTS.pdf )

Get the better chip, better mobo, better card

AMD2 6400+ $185

Gbyte GA-MA790FX-DQ6 $265

Asus 8800GT 1gb $265

2gb ram $55

total $770

Id say the 1gb GT would work better than the 512mb GTS on the Large screen LCD you'll use.

If you want a bigger card ($300 more for 1gb Asus 3870 x2) you need a 850w Coolermaster realpower Pro for $240.

$$$$ adds up when you want the good graphics cards

I run a q6600, can clock to 3.85 but 3.6 is good, run watercooling and 2x ATI 2900XT in crossfire & watercooled, raid harddrives, above mentioned 850w power, 4gb ram with heatsinks, and a X38 mobo, + big mofo case lol. gaming only. oh and sau :(

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911249
Share on other sites

SADDDDDDDD SO SADDDDDDDDD^^^^^.... im a geek but i would never waste that much money..... if it was your car... well yeah definatly..... but at least you could show it of.... all you end up wtih is a computer to make the sniffling grease ball geeks want to sexually satify you for a touch of your keyboard...... sad but as close to true as you can get.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911300
Share on other sites

whatever-he got stuck up me so, yeah, whatever. could have said worse Im sure

sorry, pain tablets :D

anyway, for what you had listed, for $50 more you can go a fair bit better (ie next model up on the stuff in your list)

good luck with it mate

let us know how it turns out

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911430
Share on other sites

Not bad, but for a similar amount of $ you can build one with a Intel C2D which is faster overall. & they can be OCed easily while the AMD are pretty much @ their max frequency already.

Prices were taken from MSY

Intel C2D E8400 ~$220

Gigabyte P35 DS3P ~$155

2Gb kit 1066mhz Ram ~$75

512mb 8800GTS ~$325

All up $775.

Also do you need new hard drives? & How big is your LCD? For a system like that, make sure you have at least a GOOD quality 500w PSU (with a amp rating of over 20Amps on the 12V rail).

Also you might want to check out the PC building section on http://whirlpool.net.au/ for more info.

Edited by Mayuri Krab
Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911454
Share on other sites

You should be fine as long as you know what you are getting, & buy from local salers' (in AU) with good rep.

Having said that, I have seen people sells all kinds of dodge crap there.

Like a Quad Core E6550, that like saying I'm selling an original factory N/A GT-R.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3912172
Share on other sites

sorry to hijack the thread but.....

looking at upgrading some computer parts for a mate of mine

he's got MS so he is in a wheelchair the whole time, so he doesnt play like full on games

he use's his new Samsung 42" Plasma as the screen

he already has 1Gb ram, and a 60gb hard drive

he needs a new vid card to have true widescreen on the tv and as a consequence a new mobo and cpu (as the mobo is old and only has AGP)

so this is what ive come up with - cheap, but will do the job:

Pentium Dual Core E2180 2.0GHz about $78

Asus P5GC-MX/1333 about $55

XFX NVidia 8400GS 256Mb about $40

that should do it alright yeah???

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3915780
Share on other sites

if you are getting a new mobo, does the existing ram fit it? if the old mobo was AGP and the ram fit that just check to ensure the ram is the same.

Nice and cheap setup, you may also want to look at upgrading the 60GB hard disk in the future as a lot of software is now taking up considerably more HDD space

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3919634
Share on other sites

+1 to what 25GTT said.

His probably gonna have to look at upgrading his ram aswell, pretty sure most of the motherboards that is AGP is also DDR (unless you got one of those Asrock hybrid boards that has like both DDR & DDR2 slots), while all current mobos now uses DDR 2 (or DDR3)

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3920291
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...