Jump to content
SAU Community

Recommended Posts

Hi guys,

Just curious as to wear you'd have to go or if its even possible to tint the rear tail lights of your car to black?

I have an R34 25GT (2 door) and i wish to make the inner and outer circles black or atleast a shade of black, while obivously still retaining the light comming through at both day and night.

I know theres specific places for certian models where you can buy shadow and "smoked" lenses for your cars, but im not too sure there is a smoked rear tailight revision for 34's.

And yes i HAVE seen it done, i wish i had a picture but i saw it on the road, but as whack as it sounds on a 34, with the white paintjob it looks sweet!

If a DIY was to be done, how would you go about it, any help at all on this would be appreciated!

Thanks :banana:

Link to comment
https://www.sau.com.au/forums/topic/222212-tailight-tinting/
Share on other sites

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

Spot on Bevan.

More spot on, and true to bevans form, is that if you tint the rear lights, and you have an accident where you are hit from the rear (not your fault) it will become your fault for not having lights working to the ADR's.

Legal taillights FTW!

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

Well thats exactly what i was going for, black bonnet, white 34, matt black rims, smoked side and front indicators (Gen Nismo) with the finishing touch being EXACTLY like the tailight finish on those 350z's would make it quite unique.

Thing is i would imagine the 34 light would be harder to do without the runs than the 350 lights, especially the buffering part, so im a bit put off by the fact that I might screw it up. I wouldn't mind paying someone to do it for me if they have done it before. NRG if you can get some pics by any chance when you finish your mates 34 and post em or send em my way would be great! This is exactly the finish i want on my lights 100%.

I've only seen em like i said on the road and i havn't seen a good shot of them up close to see if they look dodge or not. Thanks for that Nrg that was really helpful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks GTSboy. I will inspect the valves actually, is this something I can do while they are still in the head? The block/bores don’t look bad to be honest hey, I can still see the cross hatches in the bores and they still measure 86.5mm. I’m not sure how to measure the installed ring gaps but I will do that and take it to someone who can. 
    • I’ve had the same headache with my lowered car, scissor jack first then floor jack every time. Ended up grabbing an extra-low profile aluminum jack (about 70mm entry height) and it finally slides under the lip without drama.
    • No sync errors , i have installed AEM disk will return original 360 slot disk and check if there’s any one with running AEM disk could share setup 
    • Its been a while! Finally thought to do something on this car, so here we go. This will be a slow burning, multiple posts as I spend 0.5-1hr a day on this job, over multiple days... Full set of GKTech suspension arms!   Step 1: Buy Arms, done! Step 2: Start removing stuff. HICAS was easy. Rear suspension arms are now gone, they were a bitch but breaker bars with long handle extensions, 2 1.5hr slots later, stock arms are off! Next step, remove the hubs and take them to work to press out the bearings and bushings!  
×
×
  • Create New...