Jump to content
SAU Community

Recommended Posts

Hi guys.

I got a R32 GTR and jsut installed a large single turbo.

The problem i have is the intercooler pipe now gets in the way of my Power steering fluid reservoir (bottle).

I see most people relocate it next to the radiator/power steering pump. But i can't seem to find anywhere that sells the large hose to extend it.

So i was wondering can i use a r33 p/s reservoir as they are much more compact and will allow me to mount it at the position the standard r32 one was.

THanks

my GTR came with the reservoir relocated, and i'm currently in the process of putting it all back to where it sits when standard. I have the brackets and powersteering hose that can relocate and properly bolt in your reservoir and also the charcoal canister next it. Let me know if you are interested in it..

edit - wat u may need though is to extend 1 of the other 2 lines coming off the reservoir

Edited by shAkIeL
my GTR came with the reservoir relocated, and i'm currently in the process of putting it all back to where it sits when standard. I have the brackets and powersteering hose that can relocate and properly bolt in your reservoir and also the charcoal canister next it. Let me know if you are interested in it..

edit - wat u may need though is to extend 1 of the other 2 lines coming off the reservoir

Yeah i'll buy all that stuff off you. Just the hose and the brackets should do. PM me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...