Jump to content
SAU Community

Recommended Posts

I bought my stagea S2 1998 RS4 S rb25neo about 8 months ago and need some help with sourcing some mod parts for it. Its stock as a rock apart from pod filter. Need more grunt, its hard going from a vl with rb25 conversion pumping out 250rwkw 2 a stagea with about 100 at all fours so i want 2 start with some good mods to make around 200 at all 4's.

computer-is there a plug in type computer for the rb25 neo (best value for money?)

Front mount kits-

boost controller-

cat back system-

front pipe-i have one off a r33 which i used 4 my vl- Does this fit? (x-force)

injectors- (sard or nismo?)

Suspension- what fits the series 2? (back and front) has nismo short springs so i want to use them just need shocks?

Nismo series 2 bodykit-

Volk racing te37 rims-18 or 19 inch

Any other mods that i need to do 2 make around 200kw at all 4's

Thanks

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/
Share on other sites

See Rob at Sabbadin Automotive 9558 4422

I bout mine with only a cat back exhaust since then I did the mods in 2 stages.

Trust Front mount (made for an R33)

Front / dump pipe (cut down R33 one)

Cat

R34 Apexi PFC

Blitz ID3 Boost controller

The above should get you around 200ish rwkw

Then I put on a HKS GTRS which was a direct bolt on for an R33 but needed slight mods to fit the stagea

Bosch 600cc injectors

Walbro Fuel pump, (bosch pump will not fit in the standard pump housing)

Z32 AFM

The clutch is still hanging on and it is pumping out 265 rwkw.

The process was all pretty easy apart from the tuning as Rob seems to think the FPR is on the way out for a couple of reasons.

If you need any more info just ask

Cheers

Dave

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/#findComment-3931213
Share on other sites

im in the same boat, just got my 98 s stock as a rock besides some suspension work and want to try for some more ponies. i only wana spend bout 3 to 4 gs i duno what sturb25s budget is but do you think i should go for those first few mods you done fmic, exhaust and boost controller or wait for more cash.

sorry to sturb25 if i sound like im takn over youre thread but i thought well kill 2 birds with one stone cheers

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/#findComment-3932825
Share on other sites

See Rob at Sabbadin Automotive 9558 4422

I bout mine with only a cat back exhaust since then I did the mods in 2 stages.

Trust Front mount (made for an R33)

Front / dump pipe (cut down R33 one)

Cat

R34 Apexi PFC

Blitz ID3 Boost controller

The above should get you around 200ish rwkw

Then I put on a HKS GTRS which was a direct bolt on for an R33 but needed slight mods to fit the stagea

Bosch 600cc injectors

Walbro Fuel pump, (bosch pump will not fit in the standard pump housing)

Z32 AFM

The clutch is still hanging on and it is pumping out 265 rwkw.

The process was all pretty easy apart from the tuning as Rob seems to think the FPR is on the way out for a couple of reasons.

If you need any more info just ask

Cheers

Dave

thanks for the advice i was thinking of using a r34 Apexi PFC. easy to tune ive heard. im going 2 slowly do my mods cause i want to do it properly and cash is the problem. What does ur car go like, what year is it.

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/#findComment-3933647
Share on other sites

im in the same boat, just got my 98 s stock as a rock besides some suspension work and want to try for some more ponies. i only wana spend bout 3 to 4 gs i duno what sturb25s budget is but do you think i should go for those first few mods you done fmic, exhaust and boost controller or wait for more cash.

sorry to sturb25 if i sound like im takn over youre thread but i thought well kill 2 birds with one stone cheers

Dont be sorry man, stagea's are sick cars. i love em. This is my personal opion but i would by ur basic mods first ie: FMIC, Full Exhaust, Pod filter and then save for a decent computer cause ur computer is the heart of ur car and injectors and decent boost controller and then ull be set. Maybe a clutch would be a good idea 2 cause standard clutches arent much chop. To give u any indication on price look up just jap. heres the web address

http://www.justjap.com/

Happy hunting

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/#findComment-3933674
Share on other sites

Dont be sorry man, stagea's are sick cars. i love em. This is my personal opion but i would by ur basic mods first ie: FMIC, Full Exhaust, Pod filter and then save for a decent computer cause ur computer is the heart of ur car and injectors and decent boost controller and then ull be set. Maybe a clutch would be a good idea 2 cause standard clutches arent much chop. To give u any indication on price look up just jap. heres the web address

http://www.justjap.com/

Happy hunting

yeah thats what i thought, cheers mate.

and yeah my clutch is crap cant even get a chirpy out of it off the line, but otherwise its still flys for a stocky :P

Link to comment
https://www.sau.com.au/forums/topic/223154-stagea-mods/#findComment-3936023
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...