Jump to content
SAU Community

Recommended Posts

Hi Guys finally got a couple of pics up.

As you can see colour is alot deeper and has more metallic and pearl in it. Car changes to be alot more purple under light then the standard colour. Best of all the orange peel is reduced by far and it just looks fresh! Has been painted in and out including boot but not engine bay. (stops under rubbers)

Wheels are on, Door handles and badges are also all on, The trust exhaust is on and so are a few little interior parts as well.

Hope you guys like but i think it came out pretty well. Just going to lowwer it a bit and tint the front windows to match.

If anyone may be interested car is for sale need to put the money into house.

post-23484-1213071256_thumb.jpg

post-23484-1213071325_thumb.jpg

post-23484-1213071379_thumb.jpg

post-23484-1213074305_thumb.jpg

post-23484-1213074351_thumb.jpg

post-23484-1213074400_thumb.jpg

post-23484-1213074450_thumb.jpg

post-23484-1213074504_thumb.jpg

post-23484-1213074553_thumb.jpg

Edited by CHO50N
Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/
Share on other sites

Nice colour - what was it originally? Has it got orange peel already before you had the respray?

I thought it would be easier to de-badge it prior to respray rather than mocking around with masking tapes? How did they get around the spaces between the boot badges? no thick paint buildups?

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932108
Share on other sites

OHhhh yeah, also shaved the front bar and filled in the 6 holes behind the black mould.

Has 12 months rego and has full service books, spare key, everything!

On your other thread I thought I was expecting something.. well better than this. Rims set off a car, but in this case, they dont.

Cant see any blend in paint- just looks like you had it flow coated. Only pics though.

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932114
Share on other sites

Car was full de-badged before painting, Cant paint around badges :(

Is an excellent job with everything off inc doors to paint the edges and shut faces properly.

The car has orange peel standard, so does my mum's (V35's dont have the best standard paint) It is now alot smooth how paint should be!

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932119
Share on other sites

Car was blue, Just has alot more pearl now. Wanted it to look tidy and streetable not too overdone. It is noticably different in real life.

Things that make it too different might make it hard to sell later.

I will take it out later in the week for some proper photos.

Edited by CHO50N
Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932131
Share on other sites

I wonder is this decision to sell came in after you decided to respray...

doesn't feel worth it to me spending on a respray when you're gonna sell it soon...

Does the orange peel common on dark coloured V35? mine's silver I can't see any orange peel - white & silver might have escaped this common trait...?

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932148
Share on other sites

man, 10 years after my '93 R33 and Nissan still didn't even come up with better quality paint?

I purposely avoided any of those nice blue, black or red colour after my orange peel experience with the R33

and didn't you also put on some slotted rotors from me? lots have been spent prior to selling may not really be worth it, but good luck with the sale... issit auto or manual? if it's manual would be easier to sell and pickup more $.

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932172
Share on other sites

Cant get rid of it mate its in the paint from the factory, some cars may have it worse then others,

VE commodores are pretty bad in dark colours

Factory purposely thicnken paint up as it hides imperfection in the panels. At times it could gets peely or murky -could depend on the run at the time. Or the peel may have come from previous respray.

Its more noticeable on flat colors Red/Black. These colors dont need clear they are 2K. White/Silver/Blue need to lay color then clear. So you wont see it as much.

Nevertheless from factory Jap cars usual peel isnt to bad.

How much are you looking at selling the car for?? What model is it? Km's?

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932841
Share on other sites

Its a 2003 Premium with nav and 18,000km

I have all books, auction papers, everything you could ever want.

Car also has Sunroof and all the infiniti badging.

I want around $37,000 for it, this is a genuine car and with sunroof and perfect body is rare. Not to mention over $1,000 spent on parts plus the $1,000 on exhaust, + Paint and wheels.

Would have to have the best body and paint for any V35 of this age. Also has 12 months rego.

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3932972
Share on other sites

Factory purposely thicnken paint up as it hides imperfection in the panels. At times it could gets peely or murky -could depend on the run at the time. Or the peel may have come from previous respray.

Its more noticeable on flat colors Red/Black. These colors dont need clear they are 2K. White/Silver/Blue need to lay color then clear. So you wont see it as much.

Nevertheless from factory Jap cars usual peel isnt to bad.

How much are you looking at selling the car for?? What model is it? Km's?

No Previous repairs had been done.

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3933017
Share on other sites

No, Its called orange peel well that may not be the 100% correct name but its what everyone in the business knows it as. It is as the other guy said the finish left on the car from factory due to poor spray jobs or thick / heavily applied paint.

makes the panels of the car look like well....... the peel of an orange. can be very noticable on black cars when you look at a reflection off the paint.

Looked it up on the computer to help you with my poor explinations.

Edited by CHO50N
Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3933051
Share on other sites

Orange peel (effect)

From Wikipedia, the free encyclopedia

(Redirected from Orange peel (paint))

Jump to: navigation, search

Orange peel is a certain kind of finish that may develop on painted surfaces and cast surfaces[1]. The texture resembles the bumpy surface of the skin of an orange (fruit) hence the name.

Gloss paint sprayed on a smooth surface (such as the body of a car) should also dry into a smooth surface. However, various factors can cause it to dry into a bumpy surface resembling the texture of an orange peel. The orange peel phenomenon can then be smoothed out with ultra-fine sandpaper, but it can be prevented altogether by changing the painting technique or the materials used. Orange peel is typically the result of improper painting technique, and is caused by the quick evaporation of thinner, incorrect spray gun setup (e.g., low air pressure or incorrect nozzle), spraying the paint at an angle other than perpendicular, or applying excessive paint.

In some situations, such as interior house paint, the orange peel texture is generally desirable. In this case, a texture paint is generally applied with a spray gun. The texture is then painted over with the appropriate color. When painting walls, orange peel can also develop by using a roller with too little paint or too thick a paint and the surface dries before the texture can level.

Link to comment
https://www.sau.com.au/forums/topic/223197-v35-painted/#findComment-3933059
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...