Jump to content
SAU Community

Recommended Posts

Small drive shaft that runs between both motors on electric chairs(is at the front of the chair)

Reclining Motor cover on passenger side chair

Rear LHD door armrest plastic screw cover

Passenger and driver air vents (large and small ones)

boot lid popper button

bolt to hold down spare wheel

Have a few more little bits and pieces but let me know if you have any of this stuff

  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...
  • 3 months later...
  • 2 weeks later...
spose i should reply to this. sorry for the delay, but you ended up getting your parts hey?

Yeah I did

I still havent fitted them.

Had some issues with new bushes.

I will have to stick up photos as it was a massive problem making nolathane bushes fit on the lower control arms

  • 4 weeks later...

hey mate it has passenger front door missing drive line gone, all other panels, seats and trims, all cloth is badly sun damaged, it has no rear arms or diff or axles, would want about $600 but its pretty much usless unless you have a crashed cima..

give me a sms if you want 0450929227

Edited by E-Z
  • 3 months later...
  • 2 years later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...