Jump to content
SAU Community

Nismo Injectos, Gtr Baffle, Resistor Pack, Gtr Rear Wing, Gtr Pistons And Rods, A31 Crossmember

J'z-R33
 Share

Recommended Posts

J'z-R33 Grand Master

J'z-R33

Posted
Posted

Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $550.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed. (tomie baffle not included)

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $450.00 FIRM delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered FIRM

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $450.00 ono

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

Item: RB26 stock pistons and rods (05U)

Age: used

Condition: used out of a 80,000km engine

Price: $300.00 ?

To Fit: (What car) Rb26 or make a RB24

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, going forged

Item: A31 (Cefiro) engine cross member

Age: used

Condition: straight no rust

Price: $200.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, was going to do a 26/30 but decided against it. so this is no longer needed.

skitsdrift33 Apprentice

skitsdrift33

Posted
Posted
Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $550.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed. (tomie baffle not included)

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $450.00 FIRM delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered FIRM

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $450.00 ono

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

Item: RB26 stock pistons and rods (05U)

Age: used

Condition: used out of a 80,000km engine

Price: $300.00 ?

To Fit: (What car) Rb26 or make a RB24

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, going forged

Item: A31 (Cefiro) engine cross member

Age: used

Condition: straight no rust

Price: $200.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, was going to do a 26/30 but decided against it. so this is no longer needed.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...