Jump to content
SAU Community

Recommended Posts

I have my set of ultra lightweight Rays Gramlights 57c's that I no longer need after upgrading my wheels specs are below:

2 x 17x8.5 + 30 5x114.3 (5 STUD) with 235/40 Michelin Pilot SX ~35% Tread

2 x 17x8.5 + 40 5x114.3 (5 STUD) with 255/40 Toyo Tranpath Tyres ~35% Tread (tyres not fitted)

Included in the sale, will rims sell for less without, are two pairs of Jap High Quality Bolt on Spacers. Spacers are 15mm and 20mm which reduce offsets to +15/+20 or +10/+25 depending how they are used for that more aggressive look if you have rolled guards.

Now the buyer will need to decide which colour they prefer and paint two the same colour as the +30 offset rims are silver and the +40's gold. I bought them like that as I wasn't sure which colour I would prefer and never got around to painting them this can be done for around $100 professionally or less if you do yourself and I have priced the rims accordingly to compensate + the silver rims are minus tyres so would be easy to paint gold before fitting. I should also point out that the silver rims each have a short section of gutter rash.

Price - $900 Including Spacers

Contact - Prefer SMS 0404998591 or PM

Location - Adelaide will ship at buyers expense

Pics

gramlightsallco1.th.jpg

gramlightsgold1ln1.th.jpg

gramlightsgold2ps6.th.jpg

gramlightssilver2hy9.th.jpg

gramlightssilver1jk7.th.jpg

gramlights255tyresar4.th.jpg

Edited by nigelswazi
Interested in the 20mm spacers =) Let me know

A lot of people a PM'ing me asking if I will seperate the spacers. Now I don't really want to seperate would rather sell as a package but if I was to seperate - Spacers $120 a pair or all four $200

THIS WEEKEND ONLY TAKE THE WHOLE LOT FOR $800 FIRM PICKUP

Edited by nigelswazi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...