Jump to content
SAU Community

Jdm Gear Is All We Sell->wheels-te37 Lmgt4 Meister Sp1 Vsxx 57f Re30 Gt-c->exhaust-veilside Catback R32->bride/recaro Seats +rails +r33/34 Seats Etc


Recommended Posts

Hey Guys,

We have these on offer for Skylines.

For other models or to see a full list please check us out at www.j-imports.com.au

Note* some parts are still In Japan (ETA early August)

Veilside CatBack BNR32

$550 ETA end of May

Veilside.jpg

HKS Pipings for BNR32

$800

HKSPipings.jpg

BNR32 DumpPipe

$400 ETA end of May

DumpPipe1.jpg

Apexi Front Pipe BNR32

$400 IN STOCK

ApexiFront.jpg

HKS Dump Pipex2

$500 IN STOCK

HKSR32.jpg

We have used and new Bride/Recaro rails for R32-R33

used bride and recaro rhs $160, lhs $180 (to suit Brix and ergo, sr3)

New $270 each (to suit Zeta III, brix and ergo II)

RX.jpg

Genuine SR3 off DC2

Excellent Condition

$1300 IN STOCK

with rails $1550

SR3Red.jpg

Genuine BNR34 Seats with Rails

Excellent condition

$1900 eta early August

BNR34.jpg

Bride Ergo/Brix 1.5

We have 2 in stock

$700 each IN STOCK

with rail $800

BrideErgo.jpg

Genuine Bride Brix/Ergo 1.5

We have 2 in stock

$750 each IN STOCK

$850 with rail

RedBrix.jpg

Pair of GTR33 Seats - Rails Attached

For Nissan

$700 PAIR DRIVER SIDE HAS A LITTLE TEAR ON THE SIDE AND 2 TINY CIGGIES BURN

R33Seat.jpg

1994 RB25DET

87,000kms

$2000

RB25DET.jpg

HCR32 RB20DET Engine, 90000kms

No Loom, but Turbo Attached

For Nissan Skyline R32

$1400

uDrive40.jpg

Nismo Super Copper Mix BNR32 Push type

Brand New

$1450

NismoClutch.jpg

ORC 409D Single Plate S13/S14/HCR32 Brand New

$1200

409D.jpg

Pair of Tein Spanners

$70

uSuspe69.jpg

Cusco Zero-2 BNR32, 11,000kms

Springrate 10/8, 5 damper, 2 way height

$1450

BNR32Zero2.jpg

Zeal - 8,000kms, Springrate 10/8, 6 Damper, 2 Way Height,

For Nissan BCNR33 BNR34 ER34

$1450

ZealER34.jpg

Impul Grille off ECR33 S2

$200

ImpulR33.jpg

ARC 2Layer Radiator

For BNR32

$950

ARCBNR32.jpg

GReddy Oil Catch Tank

For most models

$150

uCooli11.jpg

BCNR33 Brembo

$2400

BremboR33.jpg

BremboR33b.jpg

Nismo Carbon Gearknob - Brand New

For Nissan Silvia S13/180SX/S14, Skyline R32/33/34

$130

NismoKnob.jpg

Nismo Leather Gearknob - Brand New

For Nissan Silvia S13/180SX/S14-R32/R33/R34

$80

NISMOleather.jpg

C's BNR32 Shortshifter

$200

CsR32.jpg

Cusco OS type Braces

For R32

$300

CuscoBracesR32.jpg

Tomei 3 point front brace for R33

$220

TomeiR33.jpg

Do-Luck Floor Brace

ECR33

$300

FloorBrace1.jpg

Kazama Castor Rods

Brand new

For S13/S14/S15/R32/R33

$300

uArms.20.jpg

MORE IN NEXT POST

Cusco Traction Rod

Brand new

For S13/S14/R32

$330

CuscoTractionRod.jpg

Volk RE30- Excellent condition

18x8.5 +25

18x9.5 +35

Advan S Drive 245/40, 275/40 ~70%

$3300 ETA early August

RE30.jpg

Volk 57F Pro- Very good condition

18x8 +31

18x9 +34

225/35, 255/35 ~70% treads

$2100 ETA early August

57F.jpg

Work Meister S1 3P

18x8 +16

18x9 +16

$2500 ETA early August

Meister18.jpg

Nismo LM GT4-Display from new

19x8.5 +25

18x9.5 +30

Bridgestone 245/35, 275/35

$3600 ETA early August

LMGT4.jpg

Work Meister 3P-Very good condition

18x9 +29

18x10 +4

$2900

MeisterBlack.jpg

Work VS-XX silver- excellent condition

18x8 +26

18x9 +20

Tyres ~70% 225/40/18

$2300

VSXX.jpg

Work Meister S1 3P

18x8.5 +26

18x9.5 +40

Tyres 235/40, 265/35 ~80%

$2500

Meister2P.jpg

SSR SP1 White

18x9 +29

Tyres Dunlop 235/40/18 ~50%

Wheels in excellent condition

$2,000

SSRWhite.jpg

Volk TE37- light gutter rash otherwise good condition

18x9.5 +12

19x10.5 +12

$3,300

BronzeTE37.jpg

SSR SP1-Very good condition

18x8 +31

18x9 +37

$2,300

BlackSP1.jpg

Volk TE37 Bronze-excellent condition

Tyres Bald

18x8.5 +30

18x9.5 +40

$2300

TE37.jpg

Work Meister S1 2P

PCD 114.3x4

15x8.5 +0 and -10

Comes with semi slick tyres

$2300

Meister15.jpg

SSR SP1 Black

PCD 114.3x5

17x9.5 +12

Dunlop LM ~75% 245/45/17

$2400

SSRBlack.jpg

Factory BNR34

18x9 +30

Tyres ~60%

$2200

R34.jpg

AVS Model 6

AD070~60% 245/45/17 (not the one shown in the photo)

17x9 +20

$2000

AVS6.jpg

Work XD9

Tyres ~75%

18x8 +28

18x9 +38

$1800

XD9.jpg

Work Meister S1

Semi Slick

17x9 + 15 +16

$2200

Meister17.jpg

Meister17a.jpg

Meister17.jpg

SSR SP1 Professor - Excellent Condition

PCD 114.3x5

17x8 +24

17x9 +24

$2100

17SSR.jpg

We will constanly updating new parts so please come back soon to check out new update ;)

You can contact me via PM, or call me on 0422 422 344

Regards,

J-Imports

  • 3 weeks later...

hey guys

i need a bottom mount drivers side rail for r32

secondhand would be best, and freight to 7250 in Tas.

cheers

greg

still available guys :(

didnt you say these were sold,if you have any ssr or meisters in 18's,drop me a p/m

BlackSP1.jpg

didnt you say these were sold,if you have any ssr or meisters in 18's,drop me a p/m

BlackSP1.jpg

these weren't the one I sold yet as it still coming next month.

I sold the set I have in stock :ermm:

these weren't the one I sold yet as it still coming next month.

I sold the set I have in stock :D

thats cool,let me know when the new shipment arrives and ill come and spend some money ;);)

Hey mate you still go these Cusco OS type Braces For R32. I would like to buy need to post sydney 2770.



  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...