Jump to content
SAU Community

Wanted A 137mm Greddy/trust Airinx Pod Filter To Fit A Z32 Afm


Recommended Posts

hi guys im after a brand new or second hand(doesnt matter) 137mm trustr airinx pod filter to fit my z32 afm i got here, i bought 2 z32 afms and only one came with the pod filter,

ok guys the filter must be 137mm and also need it to fit the z32 afm,please guys if yous know who sell these that will be excellent so guys please help me,

cheers tony

0412862091

Edited by GTRBOS
We can supply all trust/grex parts mate.

Ryan-0413804117

pm sent mate

guys i think its amec that is selling those power intake apexi filters, heaps of people are telling me to go to the apexi filters instead of the trust, i mean i got a trust here and and i was thinking it would be easier for me to get one more but i can get 2 apexi power intake filters to bolt onto z32 afm for $185 from amec and he said they have been proved that they are the best,

do yous guys think i should go for the apexi filters or is there any other filters i should go for that are better then all, here is a pic of the apexi ones guys, someone please let me know

whjhat do yous guys think of these filters to run on my z32 afms on my r32 gtr????

cheers tony

post-42095-1215040919_thumb.jpg

yer thanks guys but i just bought the apexi filters, they are rerally good aparentely and people said go for them so i just purchased them for $185 delivered,

cheers tony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
    • Haha good old Letterkenny! If you're looking for another great english canadian comedy, I strongly recommend Trailer Park Boys. 
×
×
  • Create New...