Jump to content
SAU Community

Recommended Posts

Item: Mines chipped ecu for rb25det

Condition: excellent, works perfect and made huge different over standard computer

Price: $275 inc postage

To Fit: (What car) Anything with RB25DET

Location: Adelaide

Contact: PM me or 0433549430

This changes fuel maps, boost maps, timing maps, fuel cut, speed cut. My 33gtst made an extra 23RWKW by just pluging this in on the dyno!

Great for someone who want more but cant quite afford $1000's for a full computer.

Also has its own MINES badge with serial number and all that as well.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/227274-mines-chip-ecu-rb25det/
Share on other sites

Hey

I used a HKS EVC3 and ran 12psi all day everyday ( stock turbs ) The computer was tuned by mines to run 12psi so fuel and boost maps are to suit.

My car made 168.8RWKW before the mines ecu was used then 191.8RWKW with the mines ecu and all that was done was the change of the ecu's

Mods on my car and what suit this ecu - 3 inch full exhaust, 12psi, front mount, pod filter, and good fuel ( bp ultimate )

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...