Jump to content
SAU Community

Recommended Posts

Hey Guys n Girls,

My car is currently going into compliance, and i was just wondering what steps come next, to get it registered n stuff. I know it has to

get blue slip n stuff, but can you get it registered straight away? Also i heard something about needing to get an inspection done like a

month after all this? I read the importing faq but it didnt seem to quite answer this, can anyone help me out? Oh im in NSW by the way!

Cheers,

Alex

Link to comment
https://www.sau.com.au/forums/topic/229101-after-compliance/
Share on other sites

You will have to get a blue slip then your green slip and take that to the rta with all your import papers and lots of money, then they will stuff around for ages as they will not know what they are doing ( so make sure you have plenty of time and dont go in there at 5 to 5 or they wont do it for you). They will then tell you that you have to go and get it inspected at a rta inspection center and that takes up to a mounth to get in, but what you need to do is tell them that this is the only car you have use of at the moment and they have to give you a interim redgo till the inspection gets done. Now through all this you need to be really nice to all these people as if you are not they can be a real pain in the butt. That is all the stuff i had to go through. Cheers Andrew.

It should be this way, but unfortunately some VicRoads employees have minced beef for brains.

Every VicRoads has their own things they look for when inspecting imports. need CIN, import approval, contract of sale, and RWC for rego. See Vic threads for more info.

At vicroads because the car has to submitted with a RWC the only thing they have to check is that all the numbers match what is on the paperwork and the compliance plate is installed and all obvious things done that would be a compliance issue.
so wat do they actually check at this inspection?

I think it is just a 3rd party inspection and identification i hope for your sake it is farly standard. I had lowered springs on mine and they said nothing but so you can get away with a bit but that was my car not yours, but i dont think they look at much as it only took a couple of 10 minutes or less. all the best.

i think the main hassle is getting time off work to go get it inspected...im getting the shop to put everything back on my car (xenons and the like) after its complied but speaking to the rta the inspection is basically just to make sure the id of the car is correct n stuff like that

i think the main hassle is getting time off work to go get it inspected...im getting the shop to put everything back on my car (xenons and the like) after its complied but speaking to the rta the inspection is basically just to make sure the id of the car is correct n stuff like that

As for the inspection i think you are right about the id check and as for time i did mine as the first one for the day at 6 in the morning and i had to drive for an hour to get there.

Alex you'll probably get picked up for a VIIU inspection when you apply for rego but it's nothing to worry about. All they do is check the car to see if it's a rebirth by checking the VIN and Engine numbers, Apparently it doesn't cost anything but don't take that as gospel.

Ok i done mine on thursday the guy at vicroads nice bloke happened to own a tuff looking vl turbo in the carpark (bonus for me) all he was concern about was the vin,compliance plate and engine number other than that he didnt even look at the car he did notice my pod and intercooler being non roadworthy in vic as only one intake mod allowed but he didnt say anything just checked all the numbers matched the paperwork provided and i was on my way out the door with new plates and a smile and $860 lighter for the previledge

Alex you'll probably get picked up for a VIIU inspection when you apply for rego but it's nothing to worry about. All they do is check the car to see if it's a rebirth by checking the VIN and Engine numbers, Apparently it doesn't cost anything but don't take that as gospel.

actually it costs about $30 and yes you have to pay for it. :P

the process is very simple. after compliance you need to buy your CTP greenslip. since the car has never been registered in NSW you need an establishment greenslip (as it will have no rego, or rego expiry on it). You also need to pick up a copy of it in person. Just buy it over the phone, then go to the closest branch to pick up the print out. you will also need a blueslip (costs about $120). usually the compliance workshop can organise for you the blueslip.

once you have the blueslip, rego form (blueslip workshop gives you that), greenslip, orignal invoice, import approval and your money then just go to the RTA. they process the rego, give you the bill (rego, stamp duty, plates fee). now you will most likely get pinned for a random vehicle identity check. yes it is random, there has been a rumour for a while that they do all imports, but I have personally registered cars I've imported and not had to do the identity check. if you get selected for it basically you make an appointment at one of the locations they have, usually it's a month or more waiting time, and in the meantime they wont do your rego. the inspection is just to ensure your car is not a rebirth, or stolen, or VIN change etc. if you are nice the kind RTA employee might give you a interim label and plates so that you can legally drive your car till the inspection can be done. once the inspections done you just go back to the RTA and finish off your rego.

wow now arent u just full of information :wave: thanks muchly!

the car is all done compliance wise and yes they are doing a blue slip for me, but im waitin for them to send me a damn invoice through so i can pay and get her taken home to my place!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...