Jump to content
SAU Community

Hdi Super Boost Controller - Evolution

Hybrid-HDi
 Share

Recommended Posts

Hybrid-HDi Contributor

Hybrid-HDi

Posted
Posted

HDI-SBC-D-EVOLUTION

hdi%20sbc-d-evolution.jpg

ONLY $329.00 for MEMBERS

PLUS $20.00 Shipping Australia Wide.

HDi Super Boost Controller Type-D EVOLUTION

SBC-D-EVOLUTION

This boost controller has been designed for universal fitment to any turbocharged vehicle. The HDI-SBC-D-EVOLUTION provides the driver with precision boost and accurate display and measurement.

Product Features:

  • HDi Super Electronic Boost Controller with Dual in cabin adjustment
  • Closed loop boost regulation
  • Fast target boost locking
  • 120psi Pressure balanced solenoid
  • Micro Processor controlled
  • Rigid aluminum casing
  • HDi SBG-D Plug & Play Boost Gauge with Day & Night theme
  • Peak hold and recall function (with HDI-SEBS)
  • Dual read out both Digital & Analogue Display
  • Dual Measurement PSI & BAR
  • Full 270 Degrees sweep dial provides superb visibility
  • Advanced full electronic stepper motor drive
  • High Intense light emit diode back light for high visibility
  • Universal easy installation

Product Function:

The HDI-SBC-D-EVOLUTION uses a high precision temperature compensated pressure sensor providing the precision pressure reference for your turbo boost control function. By employing a unique closed loop boost regulating technique, the boost fluctuation is minimized once the desired boost level is reached. The anti lag program minimizes turbo spooling time so that you can have Fast, Sharp acceleration while maintaining your ideal regulated boost level. The HDi Super boost Gauge Type D (HDI-SBG-D) employs advanced stepper motor technology for accuracy and fast response. Our dual display design shows both BAR and PSI in analogue and digital format simultaneously. This provides the driver with easy and precise read out in the shortest possible time.

PLEASE NOTE:

Hybrid Development International Pty Ltd (HDi) is the official and legal owner of the TRADEMARKS, Hybrid and HDi Logos. HDi has been manufacturing Hybrid Performance Products since 1994.

HDi does all its own Design, Testing & Manufacturing (D.T.M). We are not associated with any other company nor do we source our parts through another company or make them in the same factory. You are dealing direct with the manufacturer and not a middleman. Since June 2007, we no longer have a sole distributor in Australia. This company had its dealership terminated due to hi jacking our trademarks and patents which is poor business conduct, this has been legally pursuant. We would also like to point out we have never stopped production or changed our name to release a new product. We have re-established our own operation in Seven Hills, Sydney, PH: 02 9620 7388

  • 6 months later...
  • 2 weeks later...
  • 6 months later...
Hybrid-HDi Contributor

Hybrid-HDi

Posted
  • Author
Posted
Is there any chance of just getting the boost gauge?

Hi,

Thanks for the enquiry. The gauge can be purchased separately. However, please note it will only work with our HDI-SBC-D(SE) boost controller. The gauge is $80 plus postage.

Thanks

  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...