Problem With Fitting 02 Sensor Once Trust Dump Pipes Were Fitted

[brembogtr]

we have just fitted my trust dump pipes on my r33 gtr and the rear 02 sensor is touching the turbo lines.

i dont want to put aftermarket braided lines

so my other solution would be to find a smaller 02 sensor but where can i find one?

or are there any other solutions appart from making another hole for the 02 sensor further down the dump pipe?

any help is really appriciated!!!

thankyou

[R31Nismoid]

Interesting that one

I used the R33 GTR O2 sensor, and it was fine with the Trust pipes and supplied fittings.

I believe R32 might have a height problem (i do know the screw is different size etc)

Are you sure you have not slightly bent the turbo lines somewhere?

Or maybe bend them out the way a few mm?

Mine were close, but not touching

[brembogtr]

my mechanic dosent want to bend them out the way

do you have a pic of yours?

[R31Nismoid]

A few mm of slow bending, is not going to damage the lines. Hell they would probably bend a bit just taking them off and undoing the banjo's etc.

Thats the best i have, but unfortunately the O2's are not in there at that state.

But it gives you an idea

There is a bigger pic in my gallery, it wont let me link the bigger version into the forum section

[Nonie_13]

Don't even get me started on 02 sensors. Can't even undo mine was welding into the dump and its screwed