Jump to content
SAU Community

Recommended Posts

some very late model 2005s i have seen with the projectors but most do not. they also have different tail lights with the newer one being more 3D. The front bar is also a little different also on the 06

Hi Guys,

I was just wondering what the main difference is between 2005 and 2006 v35s? do they both have projectors for the HIDs?

Thanks

  • 4 weeks later...

not sure about JDM specs but for the Infiniti G in America (where i'm from) the V35 breaks down as follows:

2003-2004: Old Interior/gauges, Reflector Headlamps, Old Tail lights, Brembo brakes + 18" wheels on 6MT&Sport model

2005: New Interior/gauges, 19" forged wheels on 6MT&Sport models, no Brembos, Reflector headlamps from 03-04, Old taillights from 03-04

2006-2007: New Interior/gauges from 05, 19" forged wheels on 6MT&Sport models from 05, no Brembos from 05, Projector Headlamps, New taillights with external trunk release button

and for the 2007-2008 models:

2007 Sedan: Became new G35 sedan (equivalent to JDM V36 4dr 350GT)

2008 Coupe: Became G37coupe (equivalent to JDM V36 coupe 370GT)

hope this helps :laugh:

  • 4 weeks later...

USDM-V35 is spot on. I imported a 11/05 V35. It had the factory 19" Alloys for the 06 spec.

The 06 has slightly different tail lights- a little sharper tapored and has the external boot release.

The front of the 06 I could not pick the difference. Though dealer mentioned headlights--Maybe difference between "Projector/Reflector" headlights.

My Interior trim is exactly the same as the 06. which was a hugh bonus.

Hi Guys,

I was just wondering what the main difference is between 2005 and 2006 v35s? do they both have projectors for the HIDs?

Thanks

  • 2 weeks later...
Question, the VQ35DE in 03 Coupe is the same one as the one in a 06 model in terms of kW & Nm?

I know Infiniti G35 05 models got the rev-up engine as did the 350z.

I believe it's the same with the V35

03-04 206kW

05-06 212kW (rev up)

06+ 222kW

or thereabouts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...