Jump to content
SAU Community

Recommended Posts

some very late model 2005s i have seen with the projectors but most do not. they also have different tail lights with the newer one being more 3D. The front bar is also a little different also on the 06

Hi Guys,

I was just wondering what the main difference is between 2005 and 2006 v35s? do they both have projectors for the HIDs?

Thanks

  • 4 weeks later...

not sure about JDM specs but for the Infiniti G in America (where i'm from) the V35 breaks down as follows:

2003-2004: Old Interior/gauges, Reflector Headlamps, Old Tail lights, Brembo brakes + 18" wheels on 6MT&Sport model

2005: New Interior/gauges, 19" forged wheels on 6MT&Sport models, no Brembos, Reflector headlamps from 03-04, Old taillights from 03-04

2006-2007: New Interior/gauges from 05, 19" forged wheels on 6MT&Sport models from 05, no Brembos from 05, Projector Headlamps, New taillights with external trunk release button

and for the 2007-2008 models:

2007 Sedan: Became new G35 sedan (equivalent to JDM V36 4dr 350GT)

2008 Coupe: Became G37coupe (equivalent to JDM V36 coupe 370GT)

hope this helps :laugh:

  • 4 weeks later...

USDM-V35 is spot on. I imported a 11/05 V35. It had the factory 19" Alloys for the 06 spec.

The 06 has slightly different tail lights- a little sharper tapored and has the external boot release.

The front of the 06 I could not pick the difference. Though dealer mentioned headlights--Maybe difference between "Projector/Reflector" headlights.

My Interior trim is exactly the same as the 06. which was a hugh bonus.

Hi Guys,

I was just wondering what the main difference is between 2005 and 2006 v35s? do they both have projectors for the HIDs?

Thanks

  • 2 weeks later...
Question, the VQ35DE in 03 Coupe is the same one as the one in a 06 model in terms of kW & Nm?

I know Infiniti G35 05 models got the rev-up engine as did the 350z.

I believe it's the same with the V35

03-04 206kW

05-06 212kW (rev up)

06+ 222kW

or thereabouts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...