Jump to content
SAU Community

Recommended Posts

IMG_0137.jpg

Item:

HKS Jasma 3" cat back

Age:

Unknown

Condition:

Very good

Price:

$350

To Fit: (What car)

ECR33, BCNR33

Location:

South eastern suburbs, Melbourne

Contact:

PM

Call/SMS 0416 623 381

Comments:

I am selling my 3" HKS Jasma approved cat back exhaust which is currently installed on my R33 GTR and sounds awesome

Fitment is 100% perfect as with most if not all Japanese brand name parts

Its basically 3" cat back with no mufflers/resonator to a 5" canon which sits on a nice angle but nothing to crazy

Picture above of how it sits on the car

Thanks

Link to comment
https://www.sau.com.au/forums/topic/231864-hks-cat-back-exhaust-to-suit-r33/
Share on other sites

All PMs replied

I decided I will be taking the exhaust off the car on Saturday as the car isn't going anywhere, will clean it up so it looks all pretty. That way for those who want to inspect on the weekend can have a better look at it

I will also have after market GTR front pipes available soon :D

Thanks

PM sent

Replied mate

abu did you buy this car to strip lol or your just upgrading i guess hehe

gl wid sale bro

cheers

bahaha just upgrading Tony, you know how it is :D

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...