Jump to content
SAU Community

Recommended Posts

  • Replies 188
  • Created
  • Last Reply

Top Posters In This Topic

its a downgrade in model, theres no denying that. So for you 33 haters, SHHHHHHHHHHHHHHHHHHHH

+1 for 33 haters... some people prefer the OLDER shape... so what! Is it newer? no. did it come out after the R33 shape? no. is it an upgrade? no. there ARE those of us that prefer the R33 shape out there peoples!

..............Am I in a Skyline enthusiast forum or an "I hate R33's" forum? :(

i dont understand your reasoning kahli,you said it just gets damaged too much at school by jelous people,yet you have bought another skyline....and running costs,lol minimal difference if any between them.

is it just me or does this not make sence to anyone else ether? good on you for buying another one tho but i just dont understand the reasoning behind it.

+1 for 33 haters... some people prefer the OLDER shape... so what! Is it newer? no. did it come out after the R33 shape? no. is it an upgrade? no. there ARE those of us that prefer the R33 shape out there peoples!

..............Am I in a Skyline enthusiast forum or an "I hate R33's" forum? :(

I'd just say, an opinionated skyline enthusiast forum!

I like all Skylines (even the R30!) but I preffer the 32/34 shape... and so did Nissan! :P jk jk

Stagea's are heaps cheap now, like 10k for a series 1 rb25det auto awd.

awesome upgrade from a 33-32-s15.

I'll too have a pod to go to a new home next week, a K&N pod filter for a RB25det either stock or z32 afm

I'd just say, an opinionated skyline enthusiast forum!

I like all Skylines (even the R30!) but I preffer the 32/34 shape... and so did Nissan! :P jk jk

lol yes very openly opinionated

I definitely wouldnt mind removing my K&N pod too - less psh psh but the intercooler pipe is in the way of the snorkel for the stock air box dang it :(

its a downgrade in model, theres no denying that. So for you 33 haters, SHHHHHHHHHHHHHHHHHHHH

no, a downgrade would be going the turbo model down to a NA model.

this is a change in year of car so the term "downgrade" is invalid, especially when your moving to a lighter better performing car :(

+1 for 33 haters... some people prefer the OLDER shape... so what! Is it newer? no. did it come out after the R33 shape? no. is it an upgrade? no. there ARE those of us that prefer the R33 shape out there peoples!

..............Am I in a Skyline enthusiast forum or an "I hate R33's" forum? :(

You tell em Vu.

Damn 33 haters.

no, a downgrade would be going the turbo model down to a NA model.

this is a change in year of car so the term "downgrade" is invalid, especially when your moving to a lighter better performing car :(

Incorrect, if i went from a 32 to a 33, you'd say "nice upgrade". She has downgraded in years, theres no argument about it.

Incorrect, if i went from a 32 to a 33, you'd say "nice upgrade". She has downgraded in years, theres no argument about it.

lol i would say "ahhhh why would you do such a thing!??"

downgraded in years yes, but you didnt say that at the start :(

lol u guys are trippers.

gernerally 33's are better.. and not because of age, they got better brakes, suspension, larger engine (i wouldnt say better than RB20, but if u like less revs and more torque), upgraded interior, generally newer and longer lasting parts. only thing the 33 has going against it is the looks, looks very out dated.

anywho after all of that, i would still go a 32 :blink:

oh.. and just coz a car is newer doesnt make it better. thought some of u guys were smarter than that lol. i mean why get a 32 gtr.. get a vx commo, its newer and must be better right :P

Edited by steveP

LOL at steve :blink:

And +1 Jack...it doesn't make sense. If it was me i guess i'd just keep it till i could get the S15 right? And anyways. People at school are just jealous and they always will be whether its a 33, 32 or an S15. Just cos all they can afford is a commonwhore :P

i have a hks mushroom pod and with a few more psi than standard i feel it's pulling more air in than the apexi i had on! getting a flutter can also be done with an aftermarket bov, just tighten the spring a bit and you get the flutter at the same time a bit of air escaping! but even now i'm running the standard plumb back on my intercooler pipe because quite frankly it's been better than any bov's i've put on!

how come so much hatred for 33's? yes it's a whale but it still managed to lap the nurbuurgring 20 seconds faster than a r32! :blink:

ohh god

this arguement is going nowhere

it comes to personal preference

going from 32 to a 33 is an upgrade

going from 33 to a 32 is a downgrade

simple as that

Here we go!

argument.gif

:blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...