Jump to content
SAU Community

Squeaking Noise from Clutch???

rmahawaii
 Share

Recommended Posts

siksII Grand Master

siksII

Posted
Posted

Mine does it..after long trips it does it even louder...very clearly audible. But the clutch feels fine.

I think it sounds like a hinge or a rubber seal sumwhere which needs to be lubed up :cool:

Wouldnt worry about it....

Craved Grand Master

Craved

Posted
Posted

i wouldn't do that!!!

think it is under the bell housing cover, where the clutch engages and disengages, there is a sline there that needs lube i believe!!

if you have doubt email www.uniqueautosports.com they fixed it on my car!!

silverskyline Contributor

silverskyline

Posted
Posted

its the slave cylinder inside the box, i had mine replaced, if ur thinking of replacing it wait until u have to get ur clutch done aswell, save u alot of money, when mine was on its way it started to make a funny noises, not all the time, it use to whine alot, ps wd-40 is loosen bolts and to lubricate moving parts to an extent, its not the best lubricant, it dries up to quick and the squeaks will come back, u can by better sprays for lubricating, dont use wd for lubricating moving parts

wrxhoon Grand Master

wrxhoon

Posted
Posted

silverskyline the slave cil is not inside the g/box , its on the outside on the bellhousing .whatever u do never spray any lube on the cluch or pressure plate cause that will make it slip.

u can lubricate the pedal and fork and the thrust bearing if u could get to it but as it is inside the bellhousing u have to remove the g/box to do it and if u do that u may as well put a new clutch , pressure plate thrust and spiggott bush and while u r at it machine the flywheel too .

button290 Enthusiast

button290

Posted
Posted

if you leave it for too long it will eventually where the sleeve out and cause bigger problems thats what happened to my old car. Also if u have a heavy duty clutch and have been riding it, it will squeak. But you all sound like you know its comming from the pedal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      Rb25 trigger kit and timing misalignment

      By drifter17a · Posted

      Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
    • Ozdavroz
      ATCC Amaroo Park 1987

      By Ozdavroz · Posted

      Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • robbo_rb180
      WTB RB25 Gearbox NSW / central west

      By robbo_rb180 · Posted

      Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
    • robbo_rb180
      ATCC Amaroo Park 1987

      By robbo_rb180 · Posted

      Such a shame places like Amaroo Park have been redeveloped, smaller tracks always make for good racing. Cheers for sharing @PranK there's some good Lakeside video's too. Its so hard with older the cars as parts are so rare and everything was made for a particular chassis at that point in time. Even the V8 Supercar Blueprint era cars are all different between each chassis within a team as they learnt things and made improvements. The COTF cars between each Chassis builder is different too especially motor/oil systems/intakes. The Group A stuff is worth so much too especially chassis with good history. The only way to do it would be composite panels and similar engine drivelines to the original cars. Ford sierra running Focus RS driveline, Commodore running a short stroke LS/LT or a Falcon with coyote and a H Pattern dog box. Could use a standard ecu across all models with a Torque Map and DBW for parity which is not even used in Supercars currently. Hell a TCM is almost a full chassis car these days and the suspension is not even close to standard style in the front running cars.  
×
×
  • Create New...