Jump to content
SAU Community

Adr - 83

DaGr81

By DaGr81,
in New South Wales

 Share

Recommended Posts

DaGr81 Mentor

DaGr81

Posted
Posted

guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
guys I just read an article in zoom according to this we are allowed 95db exhaust noise level, what I don't get though is in the article it said they have only to DECC approved defect clearance stations in nsw, the granvilled 1 and campbeltown 1 now I've had a defect cleared else where, so I'm assuming that you only have to go to these 2 if the police request you to go here or if the EPA defect you, otherwise it's ok to go to any blue slip place, am I correct to assume this or what? Can some one elaborate on this cheers

if they have ticked on your defect notice only one of these 2 people can clear your defect then you have to go to one of them , if i was you id go to the cambeltown guy, im talking from experience the guy at granville is the biggest d******** ,

take a picture of your defect notice post it up so we can see what your in for ??

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4124568
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted

http://www.skylinesaustralia.com/forums/En...amp;hl=mrgtr911

I Found my old link from when i had my r32 gtr, i too at the time had big preoblems , that was a big pain to pass but after it was over i knew all the tricks in the book so if you need help shoot me a pm ...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4126888
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
cool thanks mate, you reckon they will engineer a fmic if i have already had a emissions test done?

my car passed emissions with FMIC , Filters , 3 1/2 exsaust , Engine mods , it is possible but i had to get a re tune done which cost me about $1000 , it was done By HITMAN in penrith , if you ever have any problems passing your emission testing as in if you cant pass just take your car there and hell sort it out for you...

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129395
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
did the engineer do a noise test for the exhaust? or was it under 91db?

didnt get it engineered , problem solved though as i bought a varex muffler electronic silencer kit , when i get pulled over press of a button car goes quiet , so car can be as loud as you want but press of a button makes it so quiet , good for neighbours and stuff..

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4129815
Share on other sites
MRGTR911 Experienced

MRGTR911

Posted
Posted
ahhh k , yes was also looking into this for the exhaust. just a bit pricey atm. where did you get yours done at?cheapest i have found is $400 of boost (the muffler that is)

I Got it fitted wired everything it was about $550 bucks which is reasonable price , Place called WESTERN MUFFLERS Hes on fairfield St In Fairfield . he does alot of work on my R34 GTR ....

Link to comment
https://www.sau.com.au/forums/topic/234872-adr-83/#findComment-4130119
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      That's my life. Past-Duncan has a lot to answer for
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Yep four point harness. Mounted to a bolted in brace running behind the seats. Dont use it for daily driving tbh but good to have for when its needed plus it looks cool.
    • Peeeeetaaah
      R34 Gtt Wheel Offset Advice

      By Peeeeetaaah · Posted

      I had to double check the thread title r34 gtt offset advice lol. Thought maybe i posted on the wrong thread. 😂
×
×
  • Create New...