Jump to content
SAU Community

Recommended Posts

Item: Kranze 18" mags 5x114.3 with a little dish :( .. wheels made in japan with worn racing slicks (theve had it you will need to replace the tyres) iam not 100% sure off the size of the wheels exactly but they have 255/40/18's on them and im sure you could fit 265's on the rear rims.. the rear rims have about 1cm more dish then the front rims.. i have also been told these are 3 piece rims not 100%sure on that either

Condition: pretty good condition.. 1 wheel has a little gutter rash

Price: $900 ono make me an offer or some performance mods for a r32

To Fit: cars with 5x114.3

Location: just near beenleigh

Contact: pm or on here

Comments: 18 inches of sexyness

can get more pictures if you want

post-51560-1220888459_thumb.jpg

Edited by rolzy32
Link to comment
https://www.sau.com.au/forums/topic/235305-kranze-18-mags-5x1143/
Share on other sites

Should be printed or stamped on the back of the rim - look for 18x#JJ +## and report back.

Failing that, tell people what car they were on, whetehr or not they stuck out of the guards, whether the guards were modified and how far out/in they sat from the guard lip.

i got them for my r32 gtst and when i put them on it and the rears stuck out from the guards about 3 mm... and on the front they fitted on but were just rubbing on the caliper.. and the tyre was just touching the suspension a 15-20 mm spacer would solve this also with no spacers the wheels are about 5 mm in from the guards on the front.. the wheels when on my r32 looked so touff :P

Just took these new pics to kinda show you how they sit... my car has standard suspension/height and this is with no spacers on the front or back(wheel just touches the caliper on the front)

i will get more pictures 2moro of each wheel .....

post-51560-1221011623_thumb.jpg

post-51560-1221011849_thumb.jpg

post-51560-1221011957_thumb.jpg

post-51560-1221012029_thumb.jpg

post-51560-1221012125_thumb.jpg

post-51560-1221012206_thumb.jpg

post-51560-1221012317_thumb.jpg

post-51560-1221012387_thumb.jpg

post-51560-1221012447_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...