Jump to content
SAU Community

Recommended Posts

hey guys whats the best auto transmission shop around dandenong area

ive serviced my trans myself i.e filter and fluid etc.

but i understand there is more to that than a trans service including retentioning bands or something...

obviously dont want to be charged an arm and leg aswell....

if you guys have some shops you can refer please give their shop name and phone number :P thanx

Link to comment
https://www.sau.com.au/forums/topic/235525-sesuburbs-transmission-shop/
Share on other sites

hey man .. cbf looking at those threads ... but im in keysy ... wondering when u go into a workshop ... come back here and rate it ... i have a stagea s2 auto .... and down the track might need a shift kit installed ... so want a good joint refered :P cheers buddy

nps. in regards to the valve body mod. i got mine from mv automatics in adelaide. theres guys were my fav as the shift kit works with the throttle. the harder the throttle the harder the shift. nice soft throttle and it will still change with a nice soft comfortable shift....

i opted for this rather than keas etc as there kits no matter how soft or hard the throttle is pushed you will still get a really hard shift...

I use one of the MV kits in my 33.

But if you would like a drive in drive out optoin, head down to Knox Autos, they use keez shift kits, $400 drive away with a service. My mate just had his done there and his drives the same as mine, and they are realy helpful people.

I use one of the MV kits in my 33.

But if you would like a drive in drive out optoin, head down to Knox Autos, they use keez shift kits, $400 drive away with a service. My mate just had his done there and his drives the same as mine, and they are realy helpful people.

awsome ...sorry to steal your thread chad ... but thanks guys .. no offence to the people in adelaide .... but not much of a road trip :)

RVO automatics, 10/13 dingley ave dandenong, just off cheltenham road

want some1 for auto's, daves your guy

open today to 9-4ish

i'm bout to head down there, we're having a bbq, if anyone wants to come down, (pretend to getting a quote)

only to score a free hamburger haha

contact 97945004 - 0424614710

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...