Jump to content
SAU Community

Recommended Posts

Hi Lads,

I am about to buy a current model AVC-R boost controller for my R33 GTS-T (from a SAU member, actually).

I am running the factory ECU, and will upgrade my intercooler shortly. My question is:

Do I need a Fuel Cut Defender?

The previous owner didn't use one but had an Apexi SAF-C air/fuel controller.

Thanks in advance,

Link to comment
https://www.sau.com.au/forums/topic/23634-does-avc-r-need-fcd/
Share on other sites

if ure gonna boost at 1 bar or so then on cold nights u might need a FCD

an FCD gets rid of ure fuel cut (self explanatory)

but an SAFC does something totally different so would not matter if you had one or not, if you hit the fuel cut then you hit it regardless of SAFC or not

Guys, FCD and SAFC use SAME wire - airflow. and they change voltage on this wire. so, if you have SAFC and then connect FCD after SAFC (closer to ECU) this means your SAFC will not work correct and FCD will change the data too... This means you don't need FCD if you have SAFC installed. But better go get your ECU reporgrammed.

with FCD you can make your fuel mix leaner. Same with SAFC, but SAFC has much more control over the fuel mix. (would be right to say over the airflow change). I think FCD is a scam. If you want, i can sell you mine :) I bought FCD and SAFC, but when i started to figure out how everything works i understood that FCD is not a correct boost cut limiter. To remove a boost cut and keep your A/F ratio the way you want them you need to retune your ECU.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...