Jump to content
SAU Community

Recommended Posts

Item:HKS GT3037 Pro S turbo kit

Age:5months

Condition:used for about 5xxxkms with a max of 17psi, and only street use (no track/drag use) so basicially brand new

Price:not too sure yet, but will be selling it a bit cheaper than it cost me brand new as it is used (cost me just over $4000nzd new), at the moment i am looking to see who is interested ,so if you keen feel free to make me an offer

To Fit: r33 gts25t's and r34 gtt's, only for rb25det engine, but could be used on an rb20det with a few mods possibly

Location: New Zealand

Contact:[email protected]

Comments:

Just making this thread to see if anyone would be interested in this as im 99% set on returning my car to stock and selling it (upgrading to a gtr), comes with everything you need to bolt it straight on to your rb25det, turbo, actuator,lines,gaskets,fittings,braided lines, vaccum lines, stainless dump pipe, silicon joiners, compressor elbow etc etc, this is a full bolt on kit and nothing needs to be modified to make it fit.

This made 270rwkw with 17psi on my completly stock rb25det using 95octane fuel, so has the potential to make over 300rwkw with 98 fuel and a little more boost.

I can arrange shipping to australia at the buyers cost, ofcourse.

Cheers

Jason

^^ +1

More Spec on the turbo please ;)

i.e internal, external, housing size... Is that a straight bolt on kit?

Internal wastegate, has hks adjustable actuator, has the 0.68 hks exhaust housing which can only be used with the hks split dump pipe that is made for this turbo/turbo kit, and yes like i said above it is a full bolt on kit, nothing needs to be modified at all, remove the stock turbo/lines and bolt this on.

Cheers

Edited by nizmo_freek
is this straight bolt on? so i wouldnt need to modify anything? do i need an ECU for example a power FC to get it tuned?

Yes ,as above this is a complete bolt on turbo kit for an r33 or r34 rb25det, simply unbolt you standard turbo/lines/dump pipe/intake etc etc and bolt all of the hks components on, no you do not need to modify anything at all.

An aftermarket ecu is not 100% essential to get this turbo running, you could drive around with it on the stock ecu (i would be getting the afr checked before going full throttle etc) but it wont go very well, you need to run an aftermarket ecu and get it tuned if you want to get the best on from this turbo (just like any other aftermarket turbo) , i suggest you do some research as to what you would need to reach your power goals with this turbo.

Cheers

Would want atleast $3500 for it, but like i said, im open to offers

Cheers

Hmmm, i cant seem to edit my posts, i meant $3500nzd

Cheers

Sorry to ask again but, When does full boost come in? @ how much RPM , does it lag or anything..

Here are my power and boost graphs from when it was getting tuned, it gets full boost (17.8psi at 3700rpm, and makes 170rwkw at the same rpm that it hits full boost) , it has a tiny bit more lag than the stock turbo, as you can see from the boost graph.

Picture016.jpg

Picture017.jpg

Cheers

Edited by nizmo_freek
hey interested in getting the kit, those pics above are of it before you put it on your car?, do you have any photos of the kit now?

thanks

Hey mate

Yea those photos were taking when i 1st got the kit when it was brand new, i dont have any photos of the kit now as it is still currently on my car.

Cheers :)

This kit will also come with installation instructions, and i will leave all the lines made up aswell (less headache for the next person who fits this kit, was a bit of a pain trying to follow just the pics in the instructions as all the text is in japanese) , i can also take pics of exactly how the lines are set up on my car now when i remove it , would make installation a bit easier.

If you want this kit i suggest you let me know, i already have a few people in n.z interested and have had p.ms from a few sau members.

Cheers :D

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...