Jump to content
SAU Community

And Liz was worried ?!!

gtrken

By gtrken,
in Western Australia

 Share

Recommended Posts

gtrken Grand Master

gtrken

Posted
Posted

This is the guy that told her the Brembo discs would fit her car.

When she got some correct advice , did not pick them up.

And you felt bad ???:P

I wouldn't cos check this..

http://forums.skylinesdownunder.co.nz/show...&threadid=27179

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/23762-and-liz-was-worried/
Share on other sites
Sneeza Grand Master

Sneeza

Posted
Posted

What a knob jockey! He also sent me someone elses (from this forum) GTR front pipes to my house.... I come home and find this on my door step! I was going to send them back, but luckily the person got intouch with me.

We could get everyone to write into "Zoom Magazine" (where apprently it has featured his GTR this month) and bag his ar*se out. Then say that the magazine shouldn't be promoting losers like him.

VSPEC32 Proficient

VSPEC32

Posted
Posted

Hehehehe. Yeah, they were my front pipes. They were slightly busted when I got them but lucky that they only needed a slight bit of welding to fix. All fitted and working fine. Wasn't a bad deal, just took 6wks to get to me. HKS tuned length front pipes for $270 delivered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...