Jump to content
SAU Community

Recommended Posts

Right...

I have an R32 coupe that was originally a auto. Now its manual, with an RB30DET and RB30 gearbox. The cable in the auto setup snapped and killed my powersteering so I want to know, is which cable can I use that will match the RB30 (VL commy) gearbox and still match the R32 cluster. Also will an automatic cable work on a manual box?

Secondly which clutch line can be used? Are cefiro/skyline/laurel all the same?

Any advice would be awesome.

Cheers, xsv_32

Link to comment
https://www.sau.com.au/forums/topic/237856-speedo-cable-dillema/
Share on other sites

I dunno about the RB30 stuff, but id be pulling the mechanism out of the RB30 box and comparing the diameter and number of teeth on the nylon speedo gear with the R32 one. Use the search function on this forum, go the tutorial section and type in r32 speedo sender and a tutorial from Cubes should come up. Heaps of info on swapping the r32 gear to a nissan navara gear for proper speedo function. It may be possible to swap the auto r32 gear to the VL sender unit.

Shaun.

  • 3 months later...

Hi i have a gtr r33 year 1996 mi gear box the center transfer the cluth are bad and i buy a gear box of gtr r32 i know the two transmission are the same pull type this is i have, but i see the speedometer on the trasnfer of gear box gtr r32 is cable...and the transfer speedometer of gtr r33 is electronic, i wanna to know if can put this gearbox gtr r32 into gtr r33 and don´t conect the speedometer, what do you think what happed i know the speedometer don´t work but i wanna to know if don´t affect others think in mi gtr r33, or if you have others solutions thanks......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...