Jump to content
SAU Community

Recommended Posts

Hi,

I've always wanted to have a skyline, and after driving a 99 wrx around for my first 18 months I'm looking to buy an R33 GTR.

I have been looking at a vspec r33 gtr from vic auto mart in Fawkner but not too sure if its an actual vspec model or if its just a gtr.

Can anybody give me some advice on what to look for when buying a gtr and how to pick out whether it is what they say it is. Ill add a link to the car i have been looking at.

http://www.carsales.com.au/used-cars/deale...amp;Make=NISSAN

Any help would be great.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/237961-buying-an-r33-gtr/
Share on other sites

get a compression test and a leak down test before anything make sure thats all good

get someone to drive and and u sit behind it make sure no white smoke comes out the exhaust

check the plugs while your there make sure they not white or very dry some a few things to look for

hope it helps u out

The V-Spec rear diff has cooling fins on it. The Standard GTR does not.

There are some other differences such as lower susp'n and its hardness & different tailshaft but the diff is the most obvious.

Besides above post, check all service history + logs. If that's not available, check for sludge around oil filler opening.

Check for rust

Check for damage under boot carpet and scratched panel bolts in the engine bay. If Auction report says that the condition of the car is 4 or less out of 5, then there may have been some damage repair. Just make sure it's fixed correctly.

See whether or not the odometer reading and auction statement of odo, correspond with wear on carpet, seat bolsters, steering wheel, gear shift lever. And if there are logs, see if the last entry odo reading (using a Japanese friend literate with the log entry) corresponds with the auction report.

I hope that's a great car for you - because if everything checks out, it should be...

Tez

Hiya,

You'll see the fins by popping your head underneath the rear. No need to put it up on the hoist.

But I'd certainly put it up on a hoist if only to check for rust, seepage, bushes, drive shaft boots, damage etc.

For example, if there's seepage coming down from the crankshaft seal, it'll cost heaps to replace the oil pump.

A genuine low Km, completely serviced, undamaged R33 GT-R V-Spec in great condition, may set you back $25K.

I wouldn't pay any extra for modifications unless it's extremely high quality and it's taken care of by an enthusiast.

At one extreme, you can get lower grade GTRs for $21K; and at the other extreme, a low Km LM model will still be well over $32K.

Cheers,

Tez :nyaanyaa:

R33 GT-R? Still a great shape - great car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...